Konica Minolta BIZHUB 750 User Manual page 325

Copy paper/original
6
Specify the length (X) and width (Y) of the paper, and then touch [OK].
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (Maximum 458 mm)
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (Maximum 314 mm)
– If a value outside the allowable range is specified, the message
"Input Error" appears. Type a value within the allowable range. The
allowable range differs depending on the paper sizes.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
7
Touch [OK] four times.
The Basic screen appears again.
Note
The selected size button is programmed with the entered paper size, so
that the paper size is available to be selected again without having to be
typed in. In addition, the size can be changed.
bizhub 750/600 (Phase 2)
8
8-23