Konica Minolta BIZHUB 750 User Manual page 123

Basic copy operations
4
Using the keypad, type in the desired
number of copies.
– If the number of copies was
incorrectly entered, press the [C]
(clear) key in the keypad, and
then specify the correct number
of copies.
5
Press the [Start] key.
– To stop the copy operation being
performed, press the [Stop] key.
For details, refer to "Stopping
scanning/printing" on
page 4-101.
– The next copy operation can be
queued while a copy operation is
being performed. For details, refer to "Scanning the next original to
be copied while a copy job is being printed (Next Job Reservation)"
on page 4-99.
bizhub 750/600 (Phase 2)
4
4-5