“low-power mode” after a period of inactivity. An ENERGY ® STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. bizhub 750/600...
Introduction Trademarks and Registered Trademarks KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Net- scape Communications Corporation.
Checking the copy settings ............x-23 Enlarging the size of text in touch panel screens ......x-23 Displaying explanations of functions and settings ......x-23 Interrupting a copy job ..............x-23 Printing a sample copy ..............x-23 Explanation of Manual Conventions ..........x-24 bizhub 750/600...
Page 5
Space Requirements ...............1-15 Operation Precautions ..............1-17 Power Source ................1-17 Operating Environment ..............1-17 Storage of Copies .................1-17 Before Making Copies Part Names and Their Functions .............2-2 Outside of Machine .................2-2 Inside of Machine ................2-5 Options ...................2-6 Large Capacity Unit LU-401/LU-402 ..........2-8 bizhub 750/600...
Page 6
To set the conveyance lever ............2-55 Basic Copy Operations General Copy Operation ..............3-2 To make a copy ................3-2 Operations That Cannot Be Combined .......... 3-5 Operations where the setting specified last is given priority ..3-5 bizhub 750/600...
Page 7
Positioning Original With Small Print or Photos (Orig. Image Type Settings) ............3-52 To specify an Orig. Image Type setting ........3-53 Specifying the Density Settings .............3-54 Adjusting the Print Density (Density Settings) ......3-55 Adjusting the Background Density (Adjust Background Settings) ............3-56 bizhub 750/600...
Page 8
To interrupt a copy job ..............4-8 Registering Copy Programs (Mode Memory) ......4-10 To store/change a copy program ..........4-10 To delete a copy program ............4-13 Copying With Programmed Copy Settings (Mode Memory) ..4-14 To recall a stored job ..............4-14 bizhub 750/600...
Page 9
Memory Becomes Full While Queuing a Job ........5-11 Display in Enlarge Display Mode ..........5-11 Simple Troubleshooting ..............5-12 Main body ..................5-12 ADF ....................5-14 Finisher ..................5-15 Main Messages and Their Remedies ..........5-16 Specifications Specifications ..................6-2 bizhub 750/600 ................6-2 ADF ....................6-3 Option Specifications ..............6-5 bizhub 750/600...
Page 10
To select a setting for oversized paper (Oversized Paper settings) ............7-30 To specify a paper type ............... 7-32 Originals ..................7-34 Original That Can Be Positioned into the ADF ......7-34 Precautions for Positioning Original into the ADF ......7-36 bizhub 750/600...
Page 11
To copy using the “Booklet Pagination” function ......8-60 8.11 Adding Filing Margins to Copies (“Page Margin” Function) ..8-62 To copy using the “Page Margin” function ........8-63 To adjust the position of the binding margin (“Edit Margin” setting) ..............8-65 x-10 bizhub 750/600...
Page 12
To empty the dust box of the punch kit ........9-15 Display in Enlarge Display Mode ..........9-15 To empty the dust box of the Z folding unit ......... 9-17 Display in Enlarge Display Mode ..........9-18 bizhub 750/600 x-11...
Page 13
Selecting a Destination Register ..........12-16 One-Touch Registration ..............12-16 User Box ..................12-16 Displaying the Destination Register Screen ........12-17 12.3 Specifying User Settings ...............12-19 System Setting ................12-19 Display Setting ................12-23 Initial Setting ................12-24 Copier Setting ................12-25 Scanner Setting ................12-28 x-12 bizhub 750/600...
Page 14
When User Authentication and Account Track Are Synchronized ................12-81 When User Authentication and Account Track Are Used Separately ................. 12-82 To select an authentication method ........... 12-83 12.8 User Authentication Setting ............12-87 Administrative Setting ..............12-87 User Name List ................12-87 bizhub 750/600 x-13...
Page 15
Conditions of the password rules ..........12-102 12.11 Enhanced security settings ............12-104 13 Appendix 13.1 Entering Text ..................13-2 To type text ...................13-4 List of Available Characters ............13-4 13.2 Function Combination Table ............13-5 Function Combination Table ............13-5 14 Index 14.1 Index ....................14-2 x-14 bizhub 750/600...
Scan” Setting)” on page 3-11. Copying an original containing various page sizes An original with various page sizes can be scanned and copied together. For details, refer to “Copying Original of Mixed Sizes (“Mixed Original” Set- ting)” on page 3-17. bizhub 750/600 x-15...
Copying multiple Original pages onto a single page Multiple pages of the original can be printed together on a single page. For details, refer to “Copying Multiple Original Pages Onto a Single Page (Combine Originals)” on page 3-59. ABC DEF x-16 bizhub 750/600...
For details, refer to “Stapling Copies (Staple Settings)” on page 3-67. Punching holes in copies Holes for filing can be punched in the copies. For details, refer to “Punching Holes in Copies (Punch Settings)” on page 3-72. bizhub 750/600 x-17...
Inserting paper between copies of overhead projector transparencies After each overhead projector transparency copy is printed, a page can be added to the stack as an interleaf. For details, refer to “Inserting Paper Between Overhead Projector Transpar- encies (“OHP Interleave” Function)” on page 8-2. x-18 bizhub 750/600...
Double-sided copies can be made so that the chapter title pages are printed on the front sides of pages. For details, refer to “Specifying Pages To Be Printed on the Front Side (“Chapters” Function)” on page 8-25. bizhub 750/600 x-19...
Spread (“Book Copy” Function)” on page 8-38. Repeating copy images image can be repeatedly printed on a single sheet of paper. original For details, refer to “Repeating the Copy Image on a Sheet of Paper (“Image Repeat” Function)” on page 8-46. x-20 bizhub 750/600...
Adjusting the image to fit the paper size Copies can be produced after specifying the position of the original image on the paper. For details, refer to “Adjusting the Image To Fit the Paper (Im- age Adjustment Settings)” on page 8-69. bizhub 750/600 x-21...
For details, refer to “Printing the Date/Time, Page Number or Distribution Number on Copies (“Stamp/Overlay” Functions)” on page 8-85. Managing jobs The print status of copy jobs can be checked and the jobs can be managed. For details, refer to “Managing Jobs (Job List)” on page 11-2. x-22 bizhub 750/600...
Printing a sample copy Before printing a large number of copies, a single proof copy can be printed so that it can be checked. For details, refer to “Printing a Proof Copy To Be Checked (Proof Copy)” on page 4-5. bizhub 750/600 x-23...
Metallic parts on the inside of the upper cover are very hot. Touching any part other than the paper may result in burns. Detail Text highlighted in this manner bizhub 750/600 3-31 provides more detailed information concerning operating procedures or references to sections containing additional information.
“Y” in the illustration) and the second to the length (shown as “X”). Paper Orientation Lengthwise (w) If the width (Y) of the paper is shorter than the length (X), the paper has a vertical or portrait orientation, indicated by w. bizhub 750/600 x-25...
Page 27
Introduction Crosswise (v) If the width (Y) of the paper is longer than the length (X), the paper has a horizontal or land- scape orientation, indicated by v. x-26 bizhub 750/600...
This manual describes the operation of the FAX functions which can be used when the optional fax kit, FK-502, is installed. - Refer to this User’s Guide for details on the operation of the FAX func- tions. bizhub 750/600 x-27...
This manual contains details on operating procedures using the optional Im- age Controller (IC-202). - Refer to the User’s Guide (PDF data) provided in the User Software CD- ROM or Quick Guide (printed matter) attached to IC-202 for the proce- dures to use the printer functions. x-28 bizhub 750/600...
In addition, it is prohibited under any circumstances to copy domestic or for- eign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. bizhub 750/600 x-29...
This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A solid circle indicates an imperative course of action. This symbol indicates you must unplug the device. bizhub 750/600...
Page 34
Should any of these conditions be found, im- mediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. bizhub 750/600...
Page 35
Overload could result in a fire. CAUTION • The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs. bizhub 750/600...
Page 36
Dust that accumu- lates between the plug terminals may cause a fire. Grounding WARNING • Connect the power cord to an electrical outlet that is equipped with a grounding terminal. bizhub 750/600...
Page 37
• Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. • Do not use flammable sprays, liquids, or gases near this product, as a fire could result. bizhub 750/600...
Page 38
When checking the inside of the unit for mal- functions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a “Caution HOT” cau- tion label. bizhub 750/600...
Page 39
If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. Before successive holidays CAUTION • Unplug the product when you will not use the product for long periods of time. bizhub 750/600...
FCC rules. INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 4) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. bizhub 750/600...
Dersom apparatet brukes på annen måte enn spesifisert I denne bruksan- visning, kan brukeren utsettes for usynlig laserstråling som overskrider grensen for laser klass 1. Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bøkge- lengde er 770 - 800 nm. 1-10 bizhub 750/600...
Page 42
överskrider gränsen för laserklass 1. Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 770 - 800 nm. Rear side of main body bizhub 750/600 1-11...
Notification for US only Contains Mercury in the LCD control panel backlighting lamp, and/or in the scanning unit lamp. Dispose According to Local, State or Federal Laws. 1-12 bizhub 750/600...
High voltage is present around this part. DO NOT put your hand Do not touch this part between the main body and in order to reduce the risk developing fixing unit; of electric shock. otherwise you may be injured. bizhub 750/600 1-13...
Page 45
To avoid injury, DO NOT put your hand on top of the printed sheets. Be sure to hold both sides of the printed sheets when removing them, and DO NOT leave your hand on the printed sheets while the primaty (main) tray goes up. 1-14 bizhub 750/600...
Installation and Operation Precautions Space Requirements To ensure that machine operation, consumables replenishing, part replace- ment, and regular maintenance can easily be performed, adhere to the rec- ommended space requirements detailed below. bizhub 750/600 bizhub 750/600 + LU-402 bizhub 750/600 1-15...
Page 47
Installation and Operation Precautions bizhub 750/600 + FS-602 + PI-501 + ZU-602 bizhub 750/600 + FS-602 + PI-501 + LU-402 Reminder Be sure to allow a clearance of 200 mm (7-3/4 in.) or more at the back of this machine for the ventilation duct.
- Copies that are to be kept for a long time should be kept where they are not exposed to light in order to prevent them from fading. - Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on copies. bizhub 750/600 1-17...
Page 49
Installation and Operation Precautions 1-18 bizhub 750/600...
Before Making Copies Before Making Copies Part Names and Their Functions Outside of Machine bizhub 750/600...
Page 52
2-15.) Front doors (left and right) Opened when clearing paper misfeeds Exit tray Collects printed pages Note The maximum angle that the ADF is opened can be adjusted in two stag- es. For details, contact your technical representative. bizhub 750/600...
Page 53
Power cord Supplies power to the machine Serial port (RS-232C) Used for transmissions with CS Remote Care Network connector (10Base-T/ Used for connecting the network cable when this 100Base-TX) machine is used for network printing and network scanning bizhub 750/600...
Used to turn the machine on and off Total counter Shows the total number of pages that have been printed Reminder Parts in the fusing unit are extremely hot. Touching any part in this unit may result in burns. bizhub 750/600...
Page 56
Fax kit FK-502 Allows this machine to be used as a fax machine Security Kit SC-501 Installed to encode the data saved on the hard disk so that the hard disk can be used more safely. bizhub 750/600...
Pressed to lower the bottom plate in the tray to load paper Bottom plate Raised as the paper is used. Lower by pressing the bottom-plate-lowering button. Trailing-edge guide Positions the trailing edge of the paper to be load- bizhub 750/600...
PK- 505 is installed BM tray Collects pages printed with the “Half Fold”, “Fold & Staple”, or “Tri-Fold” settings or with the “Cover Mode” function Main tray Collects printed pages Sub tray Collects printed pages bizhub 750/600...
Page 59
Before Making Copies Finisher FS-602 Finisher FS-504 +Punch Kit PK-505 Finisher FS-505 +Punch Kit PK-505 2-10 bizhub 750/600...
Page 60
Punch settings (See p. 9-15.) Stacker unit handle Used to pull out the unit when clearing paper mis- feeds in the stacker unit and when refilling the sta- ples Staple cartridge Removed when refilling the staples (See p. 9-7.) bizhub 750/600 2-11...
Slide to fit the size of paper being loaded when loading with cover sheets. Upper tray Load with cover sheets. Lower tray Load with cover sheets. Lower tray paper guide Slide to fit the size of paper being loaded when loading with cover sheets. 2-12 bizhub 750/600...
Used to pull out the unit when clearing paper mis- feeds paper misfeeds Opened when clearing paper misfeeds Punch dust box Removed when emptying punch dust that has ac- cumulated from using the Punch settings (See p. 9-17.) bizhub 750/600 2-13...
Before Making Copies Shift Tray SF-601 Part Name Description Exit tray Collects printed pages Upper cover Opened when clearing paper misfeeds 2-14 bizhub 750/600...
Press to enter Box mode. While the machine is in Box mode, the indicator on the [Box] key lights up in green. For details, refer to the Box Operations of the bizhub 750/600 User’s Guide. [Fax] key Press to enter Fax mode.
Page 65
[Accessibility] key Press to display the screen for specifying user accessibility functions. [Help] key Press to display the Main Help Menu screen, where descriptions of the various functions and details of operations can be displayed. (See p. 4-17.) 2-16 bizhub 750/600...
Page 66
Do not apply extreme pressure to the touch panel, otherwise it may be scratched or damaged. Never push down on the touch panel with force, and never use a hard or pointed object to make a selection in the touch panel. bizhub 750/600 2-17...
When the machine is ready to begin making copies after being turned on, the Basic screen appears. To activate a function or to select a setting, lightly touch the desired button in the touch panel. TYPE1 TYPE2 2-18 bizhub 750/600...
Page 68
Various commands are available to specify the box where the data is to be saved and whether or not the data is printed when it is saved. For details, re- fer to the Box Operations of the bizhub 750/600 Us- er’s Guide. [Separate Scan] key Touch to scan the original in separate batches.
Touch this icon to view a screen containing a warning code. If the warning screen was closed when a warning occurred, touch this button to display the warning screen again. Indicates that 75% to 100% of the paper remains in the paper tray 2-20 bizhub 750/600...
Page 70
Indicates that less than 25% of the paper remains in the paper tray Indicates that no paper remains in the paper tray Indicates that the toner cartridge must be replaced Indicates the orientation in which the original is positioned Indicates that “Enhanced Security Mode” is set to “ON” bizhub 750/600 2-21...
The control panel can be adjusted to either of two angles. Adjust the control panel to the angle that allows for easy operation. To adjust the angle of the control panel Press the control panel release lever, and then push down on the con- trol panel. 2-22 bizhub 750/600...
Page 72
To return the control panel to the upper posi- tion, press the control panel release lever, and then pull up on the con- trol panel. Note The control panel can also be grabbed anywhere on its outer edge and lifted. bizhub 750/600 2-23...
Open the front door on the left side. The main power switch is on the left side inside the machine. Turn on the main power switch. The indicator on the main power switch lights up in green. 2-24 bizhub 750/600...
Page 74
Note A job can also be queued while the machine is warming up after the sub power switch is turned on. For details, refer to “To scan during warm-up” on page 2-26. bizhub 750/600 2-25...
Original” on page 3-7. Using the keypad, specify the desired number of copies. How is the number of copies specified? % For details on specifying the number of copies, refer to “General Copy Operation” on page 3-2. 2-26 bizhub 750/600...
Page 76
After the machine has finished warming up, the scanned image will be printed. The machine takes about 5 minutes (bizhub 750)/4 minutes 30 seconds (bizhub 600) to warm up at normal room temperature (68°F) when the control panel is turned on using the sub power switch after the machine is turned on using the main power switch.
Do not turn off the machine with the main power switch while a queued job or stored data is waiting to be printed, otherwise the jobs will be deleted. 2-28 bizhub 750/600...
As the factory default, the Copy mode screen is displayed after 1 minute. Detail The mode screen that is displayed when the automatic system reset op- eration is performed can be changed from the Administrator mode. For details, refer to “System Setting” on page 12-19. bizhub 750/600 2-29...
For details, refer to “System Setting” on page 12-19, page 12-31. If the time for entering Low Power mode and Sleep mode are the same, the machine will immediately enter Sleep mode without entering Low Power mode. 2-30 bizhub 750/600...
Low Power mode if no operation is performed for 15 minutes, and then the machine enters Sleep mode after 60 minutes have elapsed. The length of time until the machine enters Sleep mode can be changed. For details, refer to “System Setting” on page 12-31. bizhub 750/600 2-31...
Low Power mode. Detail Whether the machine enters Low Power mode or Sleep mode when the [Power Save] key is pressed can be set from the Administrator mode. For details, refer to “System Setting” on page 12-31. 2-32 bizhub 750/600...
Type in the password (up to 8 digits) for non-business hours. How is the password for non-business hours specified? % For details on specifying the password for non-business hours, re- fer to “System Setting” on page 12-31. Touch [OK]. bizhub 750/600 2-33...
Page 83
From Administrator mode, the machine can be set so that the screen for entering the password for non-business hours is not displayed. The default setting for the “Password for Non-Business Hours” parame- ter is “OFF” (the screen is not displayed). 2-34 bizhub 750/600...
0 If a user enters an incorrect password the specified number of times, that user may be locked out and no longer be able to use the machine. Con- tact the administrator to cancel operation restrictions. Touch [User Name]. Type in the user name, and then touch [OK]. bizhub 750/600 2-35...
Page 85
Before Making Copies Touch [Password]. Type in the password, and then touch [OK]. Press the [Access] key. The input screen disap- Access pears, and the Basic screen appears. Make copies using the desired copy settings. 2-36 bizhub 750/600...
Page 86
If [Public User Access] appears, users with no access to a user name and password can touch [Public User Access] to use this machine. Note If account track settings have been applied, a screen for entering account information appears. bizhub 750/600 2-37...
0 A total of 1000 users and accounts can be registered when the hard disk drive is installed. Touch [Account Name]. – If the Administrator mode settings have been set to “Password On- ly”, touch [Input], and then continue with step 4. Type in the account name, and then touch [OK]. 2-38 bizhub 750/600...
Page 88
Before Making Copies Touch [Password]. Type in the password, and then touch [OK]. Press the [Access] key. The input screen disap- Access pears, and the Basic screen appears. Make copies using the desired copy settings. bizhub 750/600 2-39...
Page 89
When you are finished printing, press the [Access] key. A message appears, requesting confirmation to log off. Touch [Yes]. Authentication screen appears again. Detail For details on specifying account track settings, refer to “User Authenti- cation/Account Track” on page 12-40. 2-40 bizhub 750/600...
Pull out the paper tray for the tray 1 or 2. Raise the paper take-up roller. Load the paper into the tray. – Load the paper so that it is flush against the right side of the tray. bizhub 750/600 2-41...
Page 91
If there is space between the trailing-edge guide and the paper, the paper will not be fed correctly. Do not close the paper tray with too much force, otherwise the weight of the tray and paper will apply an impact to the machine that may cause damage. 2-42 bizhub 750/600...
Pull out the paper tray for the tray 3 or 4. Raise the paper take-up roller. Load the paper into the tray. – Load the paper so that it is flush against the right side of the tray. bizhub 750/600 2-43...
Page 93
If custom-sized paper is loaded, there may be some space between the paper and the trailing-edge guide. When loading the paper, make sure that it fits well against the right side of the paper tray, not the trailing-edge guide. 2-44 bizhub 750/600...
Page 94
Before Making Copies Reminder Do not close the paper tray with too much force, otherwise the weight of the tray and paper will apply an impact to the machine that may cause damage. bizhub 750/600 2-45...
To load paper (bypass tray) Open the bypass tray. – Open the bypass tray to the right, and then open the folded tray to the right. Insert the paper as much as possible into the feed slot. 2-46 bizhub 750/600...
Page 96
“5.5 × 8.5 A5 Thick paper” in order to prevent paper misfeeds. For details on setting the conveyance lever to “5.5 × 8.5 A5 Thick paper”, refer to “When Thick Paper Is Loaded Into a Paper Tray” on page 2-55. bizhub 750/600 2-47...
Page 97
Load overhead projector transparencies one sheet at a time. Reminder When loading tab paper, load them in the v orientation, as shown in the illustration. Do not load label sheets in the w orientation. 2-48 bizhub 750/600...
Page 98
Be sure to load letterhead paper so that the side to be printed on faces Note The image will be printed on the surface of the paper facing down when the paper is loaded into the bypass tray. bizhub 750/600 2-49...
To load paper (LCU) Open the upper door of the large capacity unit. Press the bottom- (LU-401) plate-lowering button. – The bottom plate is lowered. (LU-402) 2-50 bizhub 750/600...
Page 100
Before Making Copies Load the paper into the (LU-401) tray. (LU-402) bizhub 750/600 2-51...
Page 101
Do not load so much paper that the top of the stack does not exceed the, mark. Make sure that the trailing-edge guide is adjusted to fit the size of the loaded paper. If there is space between the trailing-edge guide and the paper, the paper will not be fed correctly. 2-52 bizhub 750/600...
Remove the trailing-edge guide, and then insert it at the position for the desired paper size. – Press the button to remove the trailing- edge guide. – Insert the trailing- edge guide into the hole correspond- ing to the size indi- cated on the bottom plate. bizhub 750/600 2-53...
Page 103
If non-standard-sized paper, thick paper, tab paper, or special pa- per was loaded, specify the settings for the loaded paper in the Pa- per Type screen. Refer to “Specifying Paper Settings for Paper Trays” on page 7-23. 2-54 bizhub 750/600...
To set the conveyance lever Open the front doors (left and right). Turn lever M4 to the left, and then pull out the ADU unit. Lever M4 bizhub 750/600 2-55...
Page 105
Set the conveyance lever to “5.5 × 8.5 A5 Thick paper”. Conveyance lever Return the ADU unit to its original position. Close the front doors (left and right). Note After using thick paper, be sure to reset the conveyance lever to “NOR- MAL”. 2-56 bizhub 750/600...
To make a copy Press the [Copy] key to display the Basic screen in Copy mode. Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. bizhub 750/600...
Page 108
Settings” on page 3-60. – For details on specifying the “Folding” function, refer to “Specifying Folding Settings” on page 3-75. – For details on specifying settings for the Application functions, refer to “Application Functions” on page 8-2. bizhub 750/600...
Page 109
The next copy opera- tion can be queued while a copy opera- tion is being per- formed. For details, refer to “Scanning the Next Original To Be Copied While a Copy Job Is Being Printed (Next Job Reservation)” on page 3-84. bizhub 750/600...
Select the “2 Position” Staple setting. Set the “Booklet” function. The “2 Position” Staple setting is automatically cancelled, and the “Booklet” function is set. To select the “2 Position” Staple setting, cancel the “Booklet” function, and then select the “2 Position” setting. bizhub 750/600...
“2 Position” Staple setting cannot be selected. The “Booklet” function remains selected and the “2 Position” Staple setting is canceled. To select the “2 Position” Staple setting, cancel the “Booklet” function, and then select the “2 Position” setting. bizhub 750/600...
Position the original face up in the ADF. – Position the original pages so that the top of the original is to- ward the back or the right side of the ma- chine. bizhub 750/600...
Page 113
For details on selecting the original orientation, refer to “Selecting the Original Orientation (Original Direction Settings)” on page 3-22. – For details on selecting the position of the binding margin, refer to “Selecting the Position of the Binding Margin (Margin Settings)” on page 3-24. bizhub 750/600...
Position the original face down onto the original glass. – Load the document pages so that the top of the original is toward the back or the left side of the machine. When loaded in the When loaded in the v orientation: w orientation: bizhub 750/600...
– When using the ADF, load the original with the pages in order and the first page on top. Up to 100 sheets can be loaded at one time. bizhub 750/600 3-11...
Page 117
To delete the image data, press the [Stop] key, and then delete the job. For details, refer to “Stopping Scanning/Printing” on page 3-86. After the original is scanned, the message “Set the next original and press [Start].” appears. 3-12 bizhub 750/600...
Page 118
Print”, the copy settings can be changed. To change the copy set- tings, touch [Change Setting], and then touch [OK] after changing the settings as desired. Otherwise, touch [Cancel Change] to can- cel the changes to the settings. bizhub 750/600 3-13...
For details on positioning the original, refer to “To position the orig- inal on the original glass” on page 3-9. When loaded in the When loaded in the v orientation: w orientation: Close the ADF. In the Basic screen, touch [Simplex/Duplex]. 3-14 bizhub 750/600...
Page 120
[Start].” appears. Position the second page or second side of the original onto the origi- nal glass, and then press the [Start] key. – To scan the remaining pages in the original, repeat steps 7. bizhub 750/600 3-15...
Page 121
Print”, the copy settings can be changed. To change the copy set- tings, touch [Change Setting], and then touch [OK] after changing the settings as desired. Otherwise, touch [Cancel Change] to can- cel the changes to the settings. 3-16 bizhub 750/600...
(first page) faces up, as shown in the illus- tration. – For details on the original sizes that can be mixed in the ADF, refer to “Origi- nal That Can Be Po- sitioned into the ADF” on page 7-34. bizhub 750/600 3-17...
Page 123
In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. Touch [Mixed Original]. – To cancel the “Mixed Original” setting, touch [Mixed Original] again to deselect it. 3-18 bizhub 750/600...
Position the original to be copied. – For details on load- ing the original, refer to “To position the original into the ADF” on page 3-7. In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. bizhub 750/600 3-19...
Tabbed paper can be loaded into the 3rd or 4th tray or the bypass tray. – For details, refer to “Specifying Paper Settings for Paper Trays” on page 7-23 or “Loading Paper Into the Bypass Tray” on page 2-46. 3-20 bizhub 750/600...
Page 126
Basic Copy Operations In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. Touch [Tab Original]. The Tab Original Size screen appears. Touch the button for the size of the positioned original. Touch [OK]. bizhub 750/600 3-21...
ADF with the top of the original toward the right side of this machine. • Select this setting for an original placed on the original glass with the top of the original toward the left side of this machine. 3-22 bizhub 750/600...
0 For details on positioning the document, refer to “Positioning the Origi- nal” on page 3-7. Position the original to be copied. In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. Touch [Original Direction]. The Original Direction screen appears. bizhub 750/600 3-23...
To cancel changes to the settings, touch [Cancel]. Selecting the Position of the Binding Margin (Margin Settings) If the original loaded into the ADF is double-sided, specify the binding posi- tion of the document. Note The default setting is “Auto”. 3-24 bizhub 750/600...
Page 130
If the original length is more than 11-11/ 16in. a binding position along the short side A B C of the paper is selected. When the original length is more than 11-11/16in. : A B C bizhub 750/600 3-25...
When loading an original with a binding margin, position the top of the original toward the back of the machine. In the Basic screen, touch [Combine Originals]. The Combine Originals screen appears. Touch [Margin]. The Page Margin screen appears. 3-26 bizhub 750/600...
Page 132
Basic Copy Operations Touch the button for the desired margin position, and then touch [OK]. – To cancel changes to the settings, touch [Cancel]. bizhub 750/600 3-27...
[OK]. – The buttons that appear in the Change Setting screen differ de- pending on the specified settings. Settings for the following can be changed. Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original Type 3-28 bizhub 750/600...
Page 134
Basic Copy Operations – To cancel changes to the settings, touch [Cancel Change]. Simplex/Duplex screen Original Bind Position screen Zoom screen bizhub 750/600 3-29...
Page 135
For details on specifying the Zoom setting, refer to “Specifying a Zoom Setting” on page 3-34. For details on specifying a zoom ratio, refer to “Erasing Specified Areas of Copies (“Erase” Functions)” on page 8-77. Density screen Original Type screen 3-30 bizhub 750/600...
If the “×1.0” Zoom setting was specified, paper of the same size as the orig- inal is selected. If the zoom ratio was increased or decreased, a paper size that corresponds to the specified zoom ratio is automatically selected. bizhub 750/600 3-31...
Page 137
Basic Copy Operations In the Basic screen, touch [Paper]. The Paper screen appears. Touch [Auto Paper Select]. Touch [OK]. The Basic screen appears again. 3-32 bizhub 750/600...
For details, refer to “Icons That Appear in the Touch Panel” on page 2-20 In the Basic screen, touch [Paper]. The Paper screen appears. Select the paper tray loaded with the desired paper. Touch [OK]. The Basic screen appears again. bizhub 750/600 3-33...
If the “Auto Paper Select” setting was selected, the Paper screen appears. In the Paper screen, specify the desired Paper setting. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch [Auto Zoom]. Touch [OK]. The Basic screen appears again. 3-34 bizhub 750/600...
0 Touch [+] to enlarge the zoom ratio, and touch [–] to reduce the zoom ra- tio in ×0.001 intervals. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch [×1.0]. Touch [OK]. The Basic screen appears again. bizhub 750/600 3-35...
×0.999). For details on changing the zoom ratio for the “Minimal” set- ting, refer to “Storing the Desired Zoom Ratio” on page 3-43. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch [Minimal]. Touch [OK]. The Basic screen appears again. 3-36 bizhub 750/600...
×0.001 increments. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch the button for the appropriate zoom ratio according to the orig- inal and paper sizes. Touch [OK]. The Basic screen appears again. bizhub 750/600 3-37...
0 The entered zoom ratio can be stored. For details on storing the zoom ra- tio, refer to “Storing the Desired Zoom Ratio” on page 3-43. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch [XY Zoom]. The Zoom screen appears. 3-38 bizhub 750/600...
Page 144
Basic Copy Operations Touch the button under “XY Zoom”, and then use the keypad to type in the desired zoom ratio. – To cancel changes to the settings, touch [Cancel]. Touch [OK] twice. The Basic screen appears again. bizhub 750/600 3-39...
Error” appears. Type in a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value. In the Basic screen, touch [Zoom]. The Zoom screen appears. 3-40 bizhub 750/600...
Page 146
(between ×0.250 and ×4.000) for the Y direction. – To cancel changes to the settings, touch [Cancel]. Touch [OK], and then touch [OK] in the next screen that appears. The Basic screen appears again. bizhub 750/600 3-41...
×0.250 and ×4.000). For details on storing zoom ratios, refer to “Storing the Desired Zoom Ratio” on page 3-43. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch the button for the desired zoom ratio under “Set Zoom”. Touch [OK]. The Basic screen appears again. 3-42 bizhub 750/600...
Page 148
0 To store a “Minimal” zoom ratio, type in the desired zoom ratio between ×0.900 and ×0.999. In the Basic screen, touch [Zoom]. The Zoom screen appears. Touch [XY Zoom]. The Zoom screen appears. bizhub 750/600 3-43...
Page 149
Touch the button or [Minimal] where the new zoom ratio is to be stored. – To cancel changes to the settings, touch [Cancel]. The specified zoom ratio is stored. Touch [OK], and then touch [OK] in the next two screens that appear. The Basic screen appears again. 3-44 bizhub 750/600...
1-Side/2-Sides Setting Description Select this setting to produce single-sided copies from single-sided original. Select this setting to produce one double-sided copy from two single-sided original. Select this setting to produce two single-sided copies from one double-sided original. bizhub 750/600 3-45...
Page 151
Basic Copy Operations 1-Side/2-Sides Setting Description Select this setting to produce double-sided copies from double-sided original. The following procedures describe how to select a 1-Side/2-Sides setting. 3-46 bizhub 750/600...
297 mm or less. If the document length is more than 297 mm, a binding margin along the short side of the paper is selected. – If the binding position for the document is set to “Auto”, the binding margin is set at the top or at the left. bizhub 750/600 3-47...
Touch [Original Direction], select the orientation of the loaded docu- ment, and then touch [OK]. – For details on specifying the original orientation, refer to “Selecting the Original Orientation (Original Direction Settings)” on page 3-22. Touch [OK]. The Basic screen appears again. 3-48 bizhub 750/600...
0 For details on using the original glass to scan multiple original pages, re- fer to “Scanning a Multi-Page Original from the Original Glass” on page 3-14. In the Basic screen, touch [Simplex/Duplex]. The Simplex/Duplex screen appears. Touch [1 2] or [2 Touch [Binding Direction]. bizhub 750/600 3-49...
Page 155
297 mm, a binding position along the short side of the paper is selected. – If the binding position for the copy is set to “Auto”, the binding po- sition is set at the top or at the left. 3-50 bizhub 750/600...
Page 156
Basic Copy Operations – For details on specifying the original orientation, refer to “Selecting the Original Orientation (Original Direction Settings)” on page 3-22. Touch [OK]. The Basic screen appears again. bizhub 750/600 3-51...
(such as that written with a pencil). The copied text is reproduced so that it is darker, providing text that is easy to read. Dot Matrix The following procedure describes how to select an Orig. Image Type set- ting. 3-52 bizhub 750/600...
– For an original that contains faint text, touch [Dot Matrix]. The Original Image Type screen appears again. Detail To cancel a setting, touch the button for a setting different from the cur- rently selected setting. bizhub 750/600 3-53...
Each time [Light] or [Dark] is touched, the background density is lightened or darkened by one level. Touch [Std.] to select the middle setting of the nine levels. The following procedures describe how to specify the density settings. 3-54 bizhub 750/600...
Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. – To select the middle of the nine levels, touch [Std.]. – Touch [Auto] to automatically adjust the level of the density accord- ing to the document being copied. Touch [OK]. bizhub 750/600 3-55...
The Density screen appears. Select the desired background density setting. – Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. – To select the middle of the nine levels, touch [Std.]. Touch [OK]. 3-56 bizhub 750/600...
“×1.0”, Enlarge, Reduce, or XY Zoom (XY Zoom and In- dependent Zoom) settings. To use the settings together, set the “Auto Zoom for Combine/Booklet” parameter in Utility mode to “OFF”. For de- tails, refer to “Copier Setting” on page 12-25. bizhub 750/600 3-57...
Page 163
8 in 1 Select this setting to print eight original pages on one page. The page arrangement (Numbering Direction settings) can be specified. <Horizontal> <Vertical> The following procedure describes how to select a Combine Originals set- ting. 3-58 bizhub 750/600...
“Horizontal” can be viewed in the sub display area. – If “4 in 1” or “8 in 1” was selected, touch [Horizontal] or [Vertical] to specify the page arrangement. – To cancel the setting, touch the button again to deselect it. bizhub 750/600 3-59...
Position of the Binding Margin (Margin Settings)” on page 3-24. If post inserter PI-501 is installed onto finisher FS-504/FS-505/FS-602, the finisher can be operated manually. For details, refer to “Using Finisher Manually” on page 3-81. 3-60 bizhub 750/600...
Page 166
Finishing Setting Description Sort Select this setting to separate each set of a multi-page original (collated).(Refer to page 3-64) Group Select this setting to separate the copies of each page in a multi-page original (uncollated).(Refer to page 3-65) bizhub 750/600 3-61...
Page 167
Select this setting to feed out copies with the front side facing up.(Refer to page 3-66) Staple Select one of these settings to bind the copies with a staple in the corner or with two staples.(Refer to page 3-67) 3-62 bizhub 750/600...
Page 168
Select this setting to punch holes (2 or 3 holes) in the copies for filing them.(Refer to page 3-72) The following procedures describe how to select Finishing settings. Note The Staple settings and Punch settings differ depending on the installed finisher. bizhub 750/600 3-63...
Touch [Sort]. – To separate each set of copies, touch [Offset]. To cancel the set- ting, touch [Offset] again to deselect it. – To change the output tray, touch [Select Output Tray]] and select the output tray. 3-64 bizhub 750/600...
In the Basic screen, touch [Finishing]. The Finishing screen appears. Touch [Group]. – To separate each set of pages, touch [Offset]. To cancel the “Off- set” setting, touch [Offset] again to deselect it. bizhub 750/600 3-65...
As the factory default, “Face Up” is not selected. Finished copies are fed out face down. Printed copies are fed out face down. – To cancel the setting, touch [Face Up] again to deselect it. – To cancel changes to the settings, touch [Cancel]. 3-66 bizhub 750/600...
If a Staple setting is to be selected, select the orientation in which the original is positioned and the binding direction, otherwise the copies may not be stapled as desired. For details on specifying the original orientation, refer to “Selecting the Original Orientation (Original Direction Settings)” on page 3-22. bizhub 750/600 3-67...
Page 173
Original of mixed sizes cannot be stapled if all printed pages do not have the same width. If a cover sheet (front or back) is added with the “Cover Mode” function, the cover sheet (53-1/4 lb) can be sta- pled. 3-68 bizhub 750/600...
Page 174
Original of mixed sizes cannot be stapled if all printed pages do not have the same width. If a cover sheet (front or back) is added with the “Cover Mode” function, the cover sheet (53-1/4 lb) can be sta- pled. bizhub 750/600 3-69...
Up to 65 sheets can be set for 8-1/2 × 14 size. 51 to 100 sheets is only possible when the 100-sheet staple cartridge is installed. To bind copies with staples In the Basic screen, touch [Finishing]. The Finishing screen appears. 3-70 bizhub 750/600...
Page 176
11-11/16 in. or less, the long side of the paper is sta- pled. If the original length(X) is more than 11-11/16 in., the short side of the paper is stapled. Touch [OK] twice. The Basic screen appears again. bizhub 750/600 3-71...
The procedure for selecting two punched holes is described below. When Finisher FS-504/FS-505/FS-602 and Punch Kit PK-505 are installed is installed Paper Weight Paper Size 13-1/4lb to 34lb 11 × 17w, 8-1/2 × 14w, 8-1/2 × 11w/v, 5-1/2 × 8-1/2w/v, Executivew/v, Foolscap w 3-72 bizhub 750/600...
To cancel the Punch setting, touch [2-Hole] or [3-Hole] again to deselect it. – To cancel changes to the settings, touch [Cancel]. – To change the output tray, touch [Select Output Tray] and select the output tray. bizhub 750/600 3-73...
Page 179
If the original length is more than 11-11/16 in., the holes are punched along the short side of the paper. – To cancel changes to the punched hole position, touch [Cancel]. Touch [OK] twice. The Basic screen appears again. 3-74 bizhub 750/600...
Z-Fold Select this setting to fold copies at the center, and then FS-504 fold them in half again before feeding them out. (Z- FS-505 folding unit ZU-602 must be installed.) FS-602 bizhub 750/600 3-75...
“Half Fold” is selected. In the Basic screen, touch [Folding]. The Folding screen appears. Touch [Half Fold]. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Half Fold” setting, touch the button for a different setting. 3-76 bizhub 750/600...
Recommended zoom ratio when a Booklet setting is selected (×0.647) 0 When the “Fold & Staple” setting is selected, the “Group”, “Offset”, “Face Up”, Staple and Punch settings are not available. In the Basic screen, touch [Folding]. The Folding screen appears. bizhub 750/600 3-77...
* The number of sheets that can be bound together differs depending on the paper weight. 21-1/4lb paper: 20 sheets 28lb paper: 16 sheets To fold copies fanned (“Z-Fold”) 0 When the “Z-Fold” setting is selected, the “Group” and “Face Up” set- tings are not available. 3-78 bizhub 750/600...
Number of Folded Sheets Maximum Number of Sets 1 sheet 30 sets To fold copies in three (“Tri-Fold”) 0 When the “Tri-Fold” setting is selected, the “Group”, “Offset”, “Face Up”, Staple and Punch settings are not available. bizhub 750/600 3-79...
Page 185
When finisher FS-602 and Z-folding unit ZU-602 are installed Paper Weight Paper Size Number of Folded Sheets 16lb to 21-1/4lb 8-1/2 × 11w 3 sheets 21-1/4 to 28lb 1 sheet Number of Folded Sheets Maximum Number of Sets 1 sheet 50 sets 3-80 bizhub 750/600...
Specifications 11"×17", 8.5"×14", 8.5"×11"R, A3, 20 sheets or less Folding mode for Fold&Staple B4, A4R (16 to 110 lb) (20 lb paper) / 19 tray sheets or less (20 lb paper) with a thick cover pa- bizhub 750/600 3-81...
Punch setting is used with special paper, the punch kit may be dam- aged. Place a set of paper in the lower tray of the Post Inserter. Lower tray – Staple (Corner staple / 2 position staples): Place paper face up. 3-82 bizhub 750/600...
Page 188
To use Staple in combination, turn on the desired Staple mode lamp. To select only the Punch mode, turn off all the other mode lamps. Press Start/Stop button. Do you want to stop the output operation? % Press Start/Stop button on the operation panel of Post Inserter. bizhub 750/600 3-83...
[Stop] key. For details, refer to “Performing Operations on Jobs” on page 11-6. Press the [Start] key to begin scanning and outputting the current copy job. The Basic screen for reserving a copy job appears. 3-84 bizhub 750/600...
Page 190
After the current copy job is finished, the next copy job begins. – When the current copy job is finished, the copy settings for the next copy job are automatically displayed and the copy operation be- gins. bizhub 750/600 3-85...
3-87. Press the [Stop] key while a document is be- Stop ing scanned or a job is Start being printed. Scanning/printing stops. The Stopped Jobs screen appears. To resume all stopped jobs, press the [Start] key. 3-86 bizhub 750/600...
Press the [Stop] key while an original is being Stop scanned or a job is being Start printed. Scanning/printing stops. The Stopped Jobs screen appears. Select the job to be deleted, and then touch [Delete]. The selected job is deleted. bizhub 750/600 3-87...
Additional Copy Operations Additional Copy Operations Checking the Copy Settings (Mode Check) From the Mode Check screens, the current copy settings can be checked and changed if desired. To check the settings Press the [Mode Check] key. Mode Check bizhub 750/600...
Touch [←Back] or [Fwd.→] until the button for the function to be changed is displayed. Touch the button for the setting that you wish to change. The screen for specifying the setting appears. Follow the appropriate procedure to change the setting. bizhub 750/600...
Touch [Change Setting] in the screen that appeared when the sample copy is printed. – Before printing a large number of copies, a single proof copy can first be printed so that it can be checked. This prevents copy errors from occurring. bizhub 750/600...
Page 199
Why is the button for the setting that I wish to change not dis- played? The copy setting cannot be changed. % If the copy settings cannot be changed, stop printing the proof copy. Then, press the [Reset] key to cancel the copy settings, and then specify the desired settings. bizhub 750/600...
Page 200
To stop the proof copy while scanning or printing, perform the op- eration described in “Stopping Scanning/Printing” on page 3-86. – If multiple copies have been specified, another sample copy can be printed. Touch [Print]. – The remaining copies begin to be printed. bizhub 750/600...
Why is the [Interrupt] key not available? % The [Interrupt] key cannot be pressed while an original is being scanned. Select the desired copy settings. Press the [Start] key. Printing begins for the job that was interrupted. bizhub 750/600...
Page 202
The indicator on the [Interrupt] key goes off, and Interrupt mode is can- celed. The settings return to those specified before printing was interrupted. Note If the interrupting job is cancelled, printing for the interrupted job auto- matically restarts. bizhub 750/600...
The Program Name screen appears. Why is [Program Registration] not available? % If 30 copy programs have been registered, delete an unnecessary copy program. For details on deleting copy programs, refer to “To delete a copy program” on page 4-13. 4-10 bizhub 750/600...
Page 204
How is a job deleted? % Touch the button for the desired copy program, and then touch [Del.]. In the screen that appears, requesting confirmation to delete the copy program, touch [Yes] to delete the selected copy program. bizhub 750/600 4-11...
Page 205
For details, refer to “System Setting” on page 12-31. To stop registering the program, press the [Reset] key or the [Mode Mem- ory] key. No matter which screen is displayed, the registration is cancelled. Otherwise, continue to touch [Cancel] until the Basic screen is displayed. 4-12 bizhub 750/600...
In the Recall Copy Program screen, touch the button for the copy pro- gram to be deleted. Touch [Del.]. A message appears, requesting confirmation to delete the copy pro- gram. Touch [Yes]. The Recall Copy Program screen appears again. The copy settings registered in the copy program are erased. bizhub 750/600 4-13...
The Recall Copy Pro- gram screen appears. Touch the button for the copy program registered with the desired copy settings. – If the copy settings in the selected copy program are not to be checked, skip to step 8. 4-14 bizhub 750/600...
Page 208
If [OK] is touched with no copy program selected, the Basic screen appears again without a copy program recalled. The selected copy program is recalled and the Basic screen appears again. Press the [Start] key. Copying begins with the recalled copy settings. bizhub 750/600 4-15...
Page 209
Additional Copy Operations Note To stop recalling the copy program, press the [Reset] key or the [Mode Memory] key, or touch [Cancel]. The copy settings cannot be changed from the Mode Check screens. 4-16 bizhub 750/600...
Touch [Exit] to quit the Help mode and return to the screen that was dis- played before the [Help] key was pressed. bizhub 750/600 4-17...
Page 211
The items displayed in the Help menu for the [Name and function of each part] differ depending on the options that are installed. To display the next screen higher in the menu structure, touch [ Help screens (3rd level) (Example: [Copy], then [Basic]) 4-18 bizhub 750/600...
Page 212
Press the key in the keypad for the number of the desired item in the Function Map screen. To return to the Help Menu screen, touch [ ] in the Help screen dis- played by selecting an item in a Function Map screen. bizhub 750/600 4-19...
[Start], [Stop], [C] (clear), [Interrupt], [Proof Copy], [Access], [Mode Mem- ory], [Enlarge Display], [Mode Check] With the Basic screen displayed, press the [Help] key. Help The Main Help Menu screen appears. Touch [Copy] or press the [1] key in the keypad. 4-20 bizhub 750/600...
Page 214
Touch the button for the desired information or press the key in the keypad for the number to the left of the desired information to display the corresponding Help screen. After checking the Help information, touch [Exit] or press the [Help] key. The Basic screen appears again. bizhub 750/600 4-21...
To return to the upper level Help Menu screen, touch [ ] in the Help screen displayed by selecting an item in a Function Map. The screen that was displayed before the [Help] key was pressed ap- pears again. 4-22 bizhub 750/600...
“Interval” is 0.3 second. 0 The settings specified for the “Key Repeat Start/Interval Time” function are only applied in the Enlarge Display mode. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) bizhub 750/600 4-23...
Page 217
– To extend the time, touch [+].To reduce the time, touch [–]. – Both settings can be set between 0.1 and 3.0 seconds in 0.1-sec- ond intervals. – To cancel changes to the settings, touch [Cancel]. 4-24 bizhub 750/600...
Page 218
For details on the Enlarge Display mode, refer to the Enlarge Display Operations of the User’s Guide. Detail To return to the Basic screen from the Accessibility Setting screen, press the [Accessibility] key or the [Reset] key. bizhub 750/600 4-25...
0 The “Enlarge Display Timer Setting” function is available only in Enlarge Display mode. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Enlarge Display Timer Setting] or press the [2] key in the key- pad. 4-26 bizhub 750/600...
Page 220
– To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Accessibility Setting screen appears again. Touch [Close] or press the [Accessibility] key. The Basic screen appears again. bizhub 750/600 4-27...
The factory default setting is “3 sec.”. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Message Display Time] or press the [3] key in the keypad. The Message Display Time screen appears. 4-28 bizhub 750/600...
Page 222
Select whether messages are displayed for 3 seconds or for 5 sec- onds. – To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Accessibility Setting screen appears again. Touch [Close] or press the [Accessibility] key. The Basic screen appears again. bizhub 750/600 4-29...
The factory default setting for “Accept Sound Setting” is “ON”. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Sound Setting] or press the [4] key in the keypad. The Sound Setting screen appears. 4-30 bizhub 750/600...
Page 224
Select the desired setting for “Accept Sound Setting”. – To produce a sound, touch [ON]. To not produce a sound, touch [OFF]. – To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Sound Setting screen appears again. bizhub 750/600 4-31...
The factory default setting is “ON” for “Warning Sound Setting” and is “3 sec.” for “Warning Sound Time”. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Sound Setting] or press the [4] key in the keypad. The Sound Setting screen appears. 4-32 bizhub 750/600...
Page 226
To produce a sound, touch [ON]. To not produce a sound, touch [OFF]. – Select the length of the warning sound. – To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Sound Setting screen appears again. bizhub 750/600 4-33...
Page 227
Additional Copy Operations Touch [Close]. The Accessibility Setting screen appears again. Touch [Close], or press the [Accessibility] key. The Basic screen appears again. 4-34 bizhub 750/600...
Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Sound Setting] or press the [4] key in the keypad. The Sound Setting screen appears. Touch [Sound Volume Setting] or press the [3] key in the keypad. bizhub 750/600 4-35...
Page 229
– To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Sound Setting screen appears again. Touch [OK]. The Accessibility Setting screen appears again. Touch [Close] or press the [Accessibility] key. The Basic screen appears again. 4-36 bizhub 750/600...
The Touch Panel Adjust- ment screen appears. Why does the ma- chine not respond when [Touch Panel Adj.] is touched? The touch sensors are not aligned on the touch panel. % Press the [5] key in the keypad. bizhub 750/600 4-37...
Page 231
Touch [Close] or press the [Accessibility] key. The Basic screen appears again. Note If the touch panel cannot be adjusted, contact the technical representa- tive. Detail To cancel the touch panel adjustment, press the [Stop] key or the [Reset] key. 4-38 bizhub 750/600...
Enlarge Display mode. The factory default setting is “OFF”. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Auto Reset Notification] or press the [6] key in the keypad. bizhub 750/600 4-39...
Page 233
[90 sec.] or [120 sec.]) for the length of time that the message is to be displayed. – To cancel changes to the settings, touch [Cancel]. Touch [OK]. The Accessibility Setting screen appears again. Touch [Close], or press the [Accessibility] key. The Basic screen appears again. 4-40 bizhub 750/600...
Page 234
Enlarge Display mode is given priority and the message requesting confirmation to reset the settings in Enlarge Display mode is not displayed. bizhub 750/600 4-41...
The factory default setting is “No”. Display the Accessibility Setting screen. (To display the screen, refer to page 4-23) Touch [Enlarge Display Confirmation Screen] or press the [7] key in the keypad. 4-42 bizhub 750/600...
Page 236
For details on the Enlarge Display mode, refer to the User’s Guide [Enlarge Display Operations]. If [No] is touched in the message requesting confirmation to enter Enlarge Display mode, the screens are not changed. bizhub 750/600 4-43...
(call technical representative screen) The phone number and fax number for the usual technical representative ap- pears in the center of the call technical representative screen. Display in Enlarge Display Mode If a malfunction occurs, the screen shown below appears. bizhub 750/600...
To call the technical representative Write down the malfunction code (for example, C-0001) in the call tech- nical representative screen. Turn off the sub power switch. Use the main power switch to turn off the ma- chine. bizhub 750/600...
Page 241
Center is automatically notified of the malfunction code. After the message “Malfunction was detected. CS Remote Care has called the Service Center.” appears, turn off the sub power switch and the main power switch, and then unplug the machine from the electrical outlet. bizhub 750/600...
The illustration above shows all “o” and arrows displayed; however, nor- mally, all marks will not appear. Error codes may appear in the illustration description area of the JAM lo- cation display screen. For details, contact your technical representative. bizhub 750/600...
Clear the paper misfeed according to the instructions that appear in the screen. – When removing misfeed paper, be careful that the paper does not tear and remain in the machine. – Do not touch or scratch the surface of the drum. bizhub 750/600...
Page 244
Parts in the fusing unit on the left side inside the machine are extremely hot. In order to reduce the risk of burns, do not touch any part in this unit when clearing paper misfeeds. bizhub 750/600...
Check which paper tray appears highlighted in the touch panel, and then load it with paper. – To continue printing with paper from a different paper tray when there is no more paper in the paper tray, touch [Paper Tray Setting], and then select a paper tray. bizhub 750/600...
Page 246
Into the Tray 1 or 2” on page 2-41, “Loading Paper Into the Tray 3 or 4” on page 2-43, “Loading Paper Into the Bypass Tray” on page 2-46, and “Loading Paper Into the LCU (LU-401/LU-402)” on page 2-50. bizhub 750/600...
This message appears when the memory becomes full and scanning stops while scanning in Copy mode. To print all pages that have been scanned, touch [Print]. To delete the job for the scanned pages, touch [Delete]. Display in Enlarge Display Mode 5-10 bizhub 750/600...
Check the number of pages counted for the document, and then adjust the number of pages in the job to be queued. Display in Enlarge Display Mode bizhub 750/600 5-11...
(See p. 2-41, p. 2-43, p. 2-46 and p. 2-50.) Was the document not Position the document so that it is pressed close enough pressed closely against the original against the original glass? glass. (See p. 3-9.) 5-12 bizhub 750/600...
Page 250
The printed page is Was paper that curls easily Remove the paper from the paper curled. (as with recycled paper) tray, turn it over, and then load it used? again. Replace the paper with paper that is not damp. bizhub 750/600 5-13...
Securely close the ADF. Is the document one that Replace the document with one that does not meet the specifica- meets the specifications. (See tions? p. 7-34.) Is the document correctly Position the document correctly. loaded? (See p. 3-7.) 5-14 bizhub 750/600...
(when PK-505/ZU-602 is installed on FS-504/FS- 505/FS-602) If any message other than those listed above appears, perform the operation described in the message. If the problem is not corrected after the described operation is performed, contact your technical representative. bizhub 750/600 5-15...
Since the toner has run out, Replace the toner cartridge. tridge. the machine is unable to make copies. Stapler empty. Replace The staples have run out. Replace the staple cartridge. (See Staple Cartridge or can- p. 9-7.) cel Staple mode. 5-16 bizhub 750/600...
Page 254
Representative. panel. If any message other than those listed above appears, perform the operation described in the message. If the problem is not corrected after the described operation is performed, contact your technical representative. bizhub 750/600 5-17...
Leading edge/trailing edge: Less than 1/16 in. ± 1/16 in. (front side), 1/16 in. ± 1/16 in. (back side); Front edge/Rear edge: Less than 1/16 in. ± 1/16 in. First copy bizhub 750: 3.0 seconds or less bizhub 600: 3.5 seconds or less Copy speed bizhub 750: 75 ppm (8.5 ×...
Page 259
— 8-1/2 × 11 v — — — — 8-1/2 × 14 w — 8-1/2 × 11 w — 5-1/2 × 8-1/2 v — 5-1/2 × 8-1/2 w — — — — — o: Possible —: Not possible bizhub 750/600...
There are four F4 (Foolscap) sizes: 8-1/4 × 13 w, 8-1/8 × 13-1/4 w, 8- 1/2 × 13 w and 8 × 13 w. Any one of these sizes can be selected. For details, contact your technical representative. bizhub 750/600...
11 × 17 w to 5-1/2 × 8-1/2 v and 8-1/2 × 14 w (2 to 50 pages) Power requirements Supplied from main body Dimensions 16-3/4 in. (W) × 25-3/4 in. (D) × 39 in. (H) Weight Approx.132-1/4 lb Consumables Staple cartridge bizhub 750/600...
11 × 17 w: 2 to 50 pages 8-1/2 × 14w: 2 to 65 pages Other: 2 to 100 pages Power requirements Supplied from main body Dimensions 16-3/4 in. (W) × 25-3/4 in. (D) × 39 in. (H) Weight Approx.132-1/4 lb Consumables Staple cartridge bizhub 750/600...
Paper sizes (no. of bound pages): 11 × 17 w to 5-1/2 × 8-1/2 v and 8-1/2 × 14 w(2 to 50 pages) Power requirements Supplied from main unit Dimensions 16-3/4 in. (W) × 25-3/4 in. (D) × 39 in. (H) Weight Approx. 143-1/4 lb Consumables Staples cartridge bizhub 750/600...
Wide paper: Maximum 12-1/4 in. × 18 in Paper capacity 200 sheets for both upper and lower trays Power requirements Supplied from finisher Dimensions 20 in. (W) × 24-1/2 in. (D) × 8-3/4 in. (H) Weight Approx. 23-1/4 lb bizhub 750/600...
Approx. 33 lb Security Kit SC-501 Specifications Basic functions Encodes the data saved on the hard disk and combines re- trieved data. Accessories Specifications bizhub 750/600 CD-ROM Drum Developer Paper tray labels User’s Guides 1 each User’s Guide [Copy Opera- tions] User’s Guide [Enlarge Display...
Staple: 11 × 17w to 5-1/2 × 8-1/2w Punch: 11 × 17w to 5-1/2 × 8-1/2w/v and 8-1/2 × 14w* Sub tray: “Sort” and “Group” settings: 11 × 17w to 5-1/2 × 8-1/2w/v, 8-1/2 × 14w and F4 bizhub 750/600...
Page 268
- A5v or 5-1/2 × 8-1/2v - 8-1/2 × 14 or F4 Select one size from the four F4 sizes available. For details, contact your technical representative. Available only when the optional punch kit PK-505 or Z folding unit ZU-602 is installed. bizhub 750/600...
Tab Paper Select this setting when tab paper is loaded. A paper tray with this setting is not automatically se- lected when the “Auto Paper Select” setting is spec- ified or when the paper trays are switched automatically. bizhub 750/600...
Page 271
“Auto Paper Select” setting is spec- ified or when the paper trays are switched automatically. User settings can be changed so that the paper type can be selected au- tomatically. For details, refer to “System Setting” on page 12-19. bizhub 750/600...
- Store the paper laying flat, not standing on its edge. Curled paper may cause paper misfeeds. - Keep paper out of the reach of children. bizhub 750/600...
When a different paper tray is automatically selected, the next paper tray is chosen from the priority list specified using the “Auto Tray Select Setting” parameter of Utility mode. Detail To change the order in which the paper trays are selected, refer to “Sys- tem Setting” on page 12-19. bizhub 750/600...
The size of the paper loaded into the bypass tray can be detected automat- ically. In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. bizhub 750/600...
Page 275
Copy Paper/Original Touch [Auto Detect]. Touch [OK] twice. The Basic screen appears again. Note The factory default setting is “Auto Detect”. 7-10 bizhub 750/600...
The following procedure describes how to specify the setting for A4w paper loaded into the bypass tray. In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. bizhub 750/600 7-11...
Page 277
The Standard Size screen appears. Touch [A4w]. Touch [OK] three times. The Basic screen appears again. Reminder If paper other than the specified paper size is loaded, a paper misfeed may occur since the paper size is not automatically detected. 7-12 bizhub 750/600...
In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. Touch [Custom Size]. The Custom Size screen appears. bizhub 750/600 7-13...
Page 279
% The names of the memory key can be changed. For details on changing the names, refer to “To store a non-standard paper size (Custom Size settings Store)” on page 7-15. Touch [OK] three times. The Basic screen appears again. 7-14 bizhub 750/600...
Storing paper sizes that are used often allows the paper size to be quickly selected, without having to re-enter the setting. In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. Touch [Custom Size]. bizhub 750/600 7-15...
Page 281
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value. Touch the memory key where the paper size is to be stored. 7-16 bizhub 750/600...
Page 282
% Use the keyboard that appeared in the screen to type in the new name, and then touch [OK] twice. % For details on typing in text, refer to “Entering Text” on page 13-2. Touch [OK] four times. The Basic screen appears again. bizhub 750/600 7-17...
11 × 17-size original to be print- In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. 7-18 bizhub 750/600...
Page 284
Select the size of the paper to be loaded and image adjustment. – To select a paper size in centimeters, touch [Metric]. The list of pa- per sizes in centimeters appears. To change the size, touch [Change Size]. The Change Size screen for oversized paper appears. bizhub 750/600 7-19...
Page 285
The Basic screen appears again. Note The selected size button is programmed with the entered paper size, so that the paper size is available to be selected again without having to be typed in. In addition, the size can be changed. 7-20 bizhub 750/600...
“Auto Paper Select” setting or the automatic tray switching feature. In the Basic screen, touch [Paper]. The Paper screen appears. Touch the button for the bypass tray, and then touch [Change Tray Set- tings]. bizhub 750/600 7-21...
Page 287
Touch [OK] twice. The Basic screen appears again. Reminder If overhead projector transparencies or thick paper is loaded into the by- pass tray, be sure to select the corresponding paper type, otherwise a paper misfeed may occur. 7-22 bizhub 750/600...
An item can also be selected by pressing the key in the keypad for the number beside the desired button. – For “2 User Setting”, press the [2] key in the keypad. The User Setting screen appears. bizhub 750/600 7-23...
Page 289
The System Setting screen appears. Touch [3 Paper Tray Setting]. The Paper Tray Setting screen appears. Note To change the paper size for paper loaded into the tray 1 and 2 and the LCU (LU-401/LU-402), contact your technical representative. 7-24 bizhub 750/600...
For details on changing the paper size for the tray 3 and 4, refer to “Loading Paper of a Different Size Into Paper Trays” on page 2-53. The Paper Type screen appears. Touch the button for the tray 3, and then touch [Paper Size]. The Paper Size screen appears. bizhub 750/600 7-25...
Paper Tray Setting screen” on page 7-23. – For details on changing the paper size for the tray 3 and 4, refer to “Loading Paper of a Different Size Into Paper Trays” on page 2-53. The Paper Type screen appears. 7-26 bizhub 750/600...
Page 292
Touch [Standard Size2]. – The Paper Size screen that appears differs depending on the paper size type that is selected. Buttons for the available paper sizes appear. Select the size of the paper to be loaded. Touch [OK]. bizhub 750/600 7-27...
For details on changing the paper size for the tray 3 and 4, refer to “Loading Paper of a Different Size Into Paper Trays” on page 2-53. The Paper Type screen appears. Touch the button for the tray 3, and then touch [Paper Size]. The Paper Size screen appears. 7-28 bizhub 750/600...
Page 294
“Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value. Touch [OK]. bizhub 750/600 7-29...
For details on changing the paper size for the tray 3 and 4, refer to “Loading Paper of a Different Size Into Paper Trays” on page 2-53. The Paper Type screen appears. Touch the button for the tray 3, and then touch [Paper Size]. The Paper Size screen appears. 7-30 bizhub 750/600...
Page 296
“Input Error” appears. Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key to erase the value, and then spec- ify the correct value. Select the desired image position. Touch [OK]. bizhub 750/600 7-31...
For details on displaying the Paper Tray Setting screen, refer to “To display the Paper Tray Setting screen” on page 7-23. The Paper Type screen appears. Touch the button for the tray 1, and then touch [Paper Type]. The Paper Type screen appears. 7-32 bizhub 750/600...
Page 298
Copy Paper/Original Select the type of paper to be loaded. Touch [OK]. bizhub 750/600 7-33...
100 sheets (21-1/4 lb paper) For documents of mixed sizes Single-Sided Original Double-Sided Original Original paper type/ 13-1/4 lb to 53-1/4 lb Weight Original size Refer to “Mixed originals paper sizes”. Paper capacity 100 sheets (21-1/4 lb paper) 7-34 bizhub 750/600...
Page 300
4 lb, thin paper: 13-1/4 lb to 15-3/4 lb Original size 11 × 17, 8-1/2 × 14, 8-1/2 × 11w/v, 5-1/2 × 8-1/2w/v, A3, B4, A4, B5w/v, B6w Paper capacity 100 sheets (21-1/4 lb paper) Note Z-folded original can only be scanned using the ADF. bizhub 750/600 7-35...
To copy original that cannot be positioned into the ADF, position them on the original glass. Original Glass Original Original type Sheets, books (spreads), three-dimensional objects Original size 11 × 17 w to 5-1/2 × 8-1/2 w/v A3 w to B6 w Maximum weight 15 lb 7-36 bizhub 750/600...
- Do not place objects exceeding 15 lb on the original glass, otherwise the original glass may be damaged. - If a book is placed on the original glass, do not press it down extremely hard, otherwise the original glass may be damaged. bizhub 750/600 7-37...
E F G H E F G H E F G H Detail For details on loading overhead projector transparencies, refer to “Paper Types and Paper Capacities” on page 7-4, “Loading Paper Into the Bypass Tray” on page 2-46. bizhub 750/600...
Paper Into the Bypass Tray” on page 2-46. Select “OHP” for the paper in the bypass tray. – Touch [Paper] in the Basic screen, touch the button for the bypass tray, touch [Change Tray Settings], and then touch [OHP]. Touch [OK]. The Paper screen appears. bizhub 750/600...
Page 307
Tray 3 or 4” on page 2-43, and “Loading Paper Into the Bypass Tray” on page 2-46. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. – To cancel all settings for the Application functions, touch [Reset]. The Sheet/Cover/Chapter Insert screen appears. bizhub 750/600...
Page 308
To cancel changes to the settings, touch [Cancel]. – To cancel the “OHP Interleave” function, touch [OFF]. – To copy the document onto the interleaf, touch [Copy] under “Copy or Blank”. Touch [OK] twice. If necessary, specify any other copy settings. Press the [Start] key. bizhub 750/600...
When specifying a page in a double-sided original, the front and back sides of one page are considered as two pages. Therefore, to specify the back side of the second page of the original, specify “4”. Insert original (one-sided) Insert original Insert images Insert original (double-sided) bizhub 750/600...
Page 310
To cancel all settings for the Application functions, touch [Reset]. Reminder Position the original in order, starting with the first page. The copy will not be printed as desired if the original is position starting with the last page. bizhub 750/600...
Load the main original (the one that the other original will be inserted into) into the ADF. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert screen appears. Touch [Insert Image]. The Insert Image screen (for specifying settings) appears. bizhub 750/600...
Page 312
Image screen (with the list of specified pages). What will happen if there are more insertion pages than the number of pages that are specified? % The remaining insertion pages are added at the end of the original. bizhub 750/600...
Page 313
Press the [Start] key. Scanning of the original to be inserted begins. What should be done if there are multiple original to be inserted? % Repeat steps 11 and 12 until all original to be inserted are scanned. 8-10 bizhub 750/600...
Back (Blank) Paper for the back cover sheet is added after the last page of the copy. The same operation is performed with double-sided copying. REPORT REPORT Front copy,Back copy REPORT REPORT Front blank,Back blank 8-12 bizhub 750/600...
– Use paper with the same size for the cover pages and for the main body of the original, and load them in the same orientation. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. bizhub 750/600 8-13...
Page 317
7. If the cover page paper is fed from the post inserter, skip to step 10. – To cancel changes to the copy settings, touch [Cancel]. – To cancel the “Cover Mode” function, touch [OFF]. 8-14 bizhub 750/600...
Page 318
Instead, only blank pages will be inserted. Touch [Front (Blank)] to insert a front cover page, touch [Back (Blank)] to insert a back cover page, and then select the tray. Touch [OK] three times. If necessary, specify any other copy settings. bizhub 750/600 8-15...
Page 319
Application Functions Using the keypad, type in the desired number of copies. Press the [Start] key. 8-16 bizhub 750/600...
7th page of the copy. “2 > 1” The front side of the 6th page of the original is copied as the 11th page of the copy and a blank page is inserted as the 12th page of the copy. bizhub 750/600 8-17...
Page 321
For details on positioning the original, refer to “Positioning the Original” on page 3-7. For an original that exceeds 100 pages, refer “Scanning the Original in Separate Batches (“Separate Scan” Setting)” on page 3-11. To cancel all settings for the Application functions, touch [Reset]. 8-18 bizhub 750/600...
Use paper with the same size for the cover pages and for the main body of the original, and load them in the same orientation. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert screen appears. bizhub 750/600 8-19...
Page 323
If the insertion paper is fed from a tray of the main unit, continue with step 7. If the insertion paper is fed from the post inserter, skip to step 12. – [Post Inserter] appears only if optional post inserter PI-501 is in- stalled. 8-20 bizhub 750/600...
Page 324
% Touch [Edit] to return to the Sheet Cover Insertion screen (with the list of specified pages). Touch the button for the page to be re- moved, and then press the [C] (clear) key in the keypad to remove the page number. bizhub 750/600 8-21...
Page 325
The Insert Sheet screen (for specifying settings) appears. Under Insert Type, touch either [Copy] or [Blank]. – If “Copy” was selected, the specified original page is printed on pa- per from the paper tray specified in step 9. 8-22 bizhub 750/600...
Page 326
Touch [Select] to enter the specified pages and display the Post In- serter (Confirmation) screen. Touch [Insert Paper]. Select the paper tray loaded with the paper for the insertion pages. Touch [OK] three times. If necessary, specify any other copy settings. bizhub 750/600 8-23...
Page 327
Application Functions Using the keypad, type in the desired number of copies. Press the [Start] key. 8-24 bizhub 750/600...
When copying double-sided documents while using the “Chapters” function, each side of one page of the document is considered two separate pages. In addition, paper tray loaded with paper for specific pages can be specified. Single-sided original Final copy Double-sided original bizhub 750/600 8-25...
Page 329
For details on positioning the original, refer to “Positioning the Original” on page 3-7. For an original that exceeds 100 pages, refer to “Scanning the Original in Separate Batches (“Separate Scan” Setting)” on page 3-11. To cancel all settings for the Application functions, touch [Reset]. 8-26 bizhub 750/600...
Application Functions To copy using the “Chapters” function Position the original to be copied. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. The Sheet/Cover/Chapter Insert screen appears. Touch [Chapters]. The Chapters screen (for specifying settings) appears. bizhub 750/600 8-27...
Page 331
% That page number is ignored. What will happen if the same page number is specified twice? % There is no change to the print result since the specified page is the same. 8-28 bizhub 750/600...
Page 332
Continue with step 12. – To cancel changes to the copy settings, touch [Cancel]. – To cancel the “Chapter” function, touch [OFF]. Touch [Chapter Paper]. The Chapter Paper screen appears. bizhub 750/600 8-29...
Page 333
The Chapters screen (for specifying settings) appears again. Touch [OK], and then touch [OK] in the next screen that appears. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-30 bizhub 750/600...
Finishing settings or the “Set Num- bering” function can be set after the entire document is scanned, and then all copies can be printed together. Document 1 REPORT REPORT Document 2 REPORT Document 3 Note 100 document batches can be set. bizhub 750/600 8-31...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Sheet/Cover/Chapter Insert]. – To cancel all settings for the Application functions, touch [Reset]. The Sheet/Cover/Chapter Insert screen appears. Touch [Program Job], and then touch [OK]. 8-32 bizhub 750/600...
Page 336
[Change Setting]. – If the document is placed on the original glass, touch [Finish] in the screen that appears, requesting confirmation that scanning of the document is finished. Position the next document batch, and then touch [Change Setting]. bizhub 750/600 8-33...
Page 337
After all document pages have been scanned, touch [Finish]. A message appears, requesting confirmation that scanning is finished. Select [Yes], and then touch [OK]. – To change the copy settings, select [No], and then touch [Change Setting]. 8-34 bizhub 750/600...
Page 338
Using the keypad, type in the desired number of copies. Touch [Execute] or press the [Start] key. – If [Cancel] is touched, a message appears, requesting confirmation to delete the data. To stop printing, select [Yes], and then touch [OK]. bizhub 750/600 8-35...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. For an original that exceeds 100 pages, refer and “Scanning the Origi- nal in Separate Batches (“Separate Scan” Setting)” on page 3-11. Touch [Application]. The Application screen appears. 8-36 bizhub 750/600...
Page 340
– To cancel all settings for the Application functions, touch [Reset]. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-37...
Front and Back Cover The front cover, separate copies of each page in the page spreads and the back cover are printed in the original page order. When “Separation” is selected 1>1 1>2 8-38 bizhub 750/600...
Page 342
Application Functions When “Front Cover” is selected SURVEYOR’S REPORT SURVEYOR’S REPORT SURVEYOR’S REPORT When “Front and Back Cover” is selected SURVEYOR’S REPORT SURVEYOR’S REPORT SURVEYOR’S REPORT SURVEYOR’S REPORT bizhub 750/600 8-39...
What should be done if the front and back covers are also being copied? % Scan the front cover, then the back cover, and then scan the re- mainder of the original. Load the paper to be used into the desired paper tray. Touch [Application]. The Application screen appears. 8-40 bizhub 750/600...
Page 344
The Book Scanning screen appears. Touch the button for the desired setting. – If necessary, touch [Erase] or [Center Erase] under “Book Erase”. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Book Copy” function, touch [OFF]. bizhub 750/600 8-41...
Page 345
What do the Book Erase functions do? % “Erase” and “Center Erase” can be used together. How are settings specified for the “Erase” function? % Refer to “Erasing Specified Areas of Copies (“Erase” Functions)” on page 8-77. In addition. 8-42 bizhub 750/600...
Page 346
Touch [OK], and then touch [OK] in the next screen that appears. In the Basic screen, touch [Paper], and then select the paper tray load- ed with the paper. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. bizhub 750/600 8-43...
Page 347
SURVEYOR’S REPORT Scanning begins. What should be done if there are multiple pages in the original? % Position the next page and repeat step 11 until all pages of the doc- ument are scanned. 8-44 bizhub 750/600...
Page 348
Application Functions After all original pages have been scanned, touch [Finish]. Press the [Start] key. Printing begins. bizhub 750/600 8-45...
The number of repeating copies of the image is detected. If the entire image does not fit within the specified area, the remaining areas are left blank as margins. Without Margin The number of repeating copies of the image is automatically detect- 8-46 bizhub 750/600...
Page 350
Application Functions “With Margin” setting Original “Without Margin” setting Original 2 Repeat Original 4 Repeat Original 8 Repeat bizhub 750/600 8-47...
3-7. Load the paper to be used into the desired paper tray. Touch [Application]. The Application screen appears. Touch [Book Copy/Repeat]. – To cancel all settings for the Application functions, touch [Reset]. The Book Copy/Repeat screen appears. 8-48 bizhub 750/600...
Page 352
To cancel the “Image Repeat” function, touch [OFF]. The scanning area is detected, and the size appears under “Scan Range”. Check the scanning size under “Scan Range”, touch [OK], and then touch [OK] in the next screen that appears. bizhub 750/600 8-49...
Page 353
In the Basic screen, touch [Paper], and then select the paper tray load- ed with the paper. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-50 bizhub 750/600...
Position the original to be copied. Load the paper to be used into the desired paper tray. Touch [Application]. The Application screen appears. Touch [Book Copy/Repeat]. – To cancel all settings for the Application functions, touch [Reset]. The Book Copy/Repeat screen appears. bizhub 750/600 8-51...
Page 355
The Image Repeat screen appears. Select the layout method. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Image Repeat” function, touch [OFF]. Touch [Set Range], and then specify the scanning area. The Set Range screen appears. 8-52 bizhub 750/600...
Page 356
If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the value was in- correctly entered, press the [C] (clear) key to erase the value, and then specify the correct value. Touch [OK] three times. bizhub 750/600 8-53...
Page 357
For details, refer to “To repeat the image the specified number of times (“Repeat”)” on page 8-55. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-54 bizhub 750/600...
Position the original to be copied. Load the paper to be used into the desired paper tray. Touch [Application]. The Application screen appears. Touch [Book Copy/Repeat]. – To cancel all settings for the Application functions, touch [Reset]. The Book Copy/Repeat screen appears. bizhub 750/600 8-55...
Page 359
Range Original Size Setting”. Touch [2/4/8 Repeat]. – For details on specifying the repeating conditions, refer to “Repeat- ing the Copy Image on a Sheet of Paper (“Image Repeat” Function)” on page 8-46. The 2/4/8 Repeat screen appears. 8-56 bizhub 750/600...
Page 360
[–] and [+] to specify the dimensions, and then touch [OK]. – If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on switching between decimal and frac- tion values, refer to “System Setting” on page 12-19. bizhub 750/600 8-57...
Page 361
In the Basic screen, touch [Paper], and then select the paper tray load- ed with the paper. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-58 bizhub 750/600...
With single-sided copies, the pages are printed on two sheets of paper. With double-sided copies, the pages are printed on the front and back sides of a single sheet of paper. Reminder Position the original into the ADF. bizhub 750/600 8-59...
For a document that exceeds 100 pages, refer “Scanning the Orig- inal in Separate Batches (“Separate Scan” Setting)” on page 3-11. Touch [Application]. The Application screen appears. Touch [Book Copy/Repeat]. – To cancel all settings for the Application functions, touch [Reset]. The Book Copy/Repeat screen appears. 8-60 bizhub 750/600...
Page 364
To cancel changes to the settings, touch [Cancel]. – To cancel the “Booklet Pagination” function, touch [OFF]. Touch [OK] twice. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-61...
“Right” setting “Left” setting “Top” setting Detail If the positions of the staples or punched holes are different from the binding position, the positions of the staples or punched holes are given priority. 8-62 bizhub 750/600...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Page Margin]. – To cancel all settings for the Application functions, touch [Reset]. The Page Margin screen appears. Specify the position of the filing margin. bizhub 750/600 8-63...
Page 367
How can the entered margin position be corrected? % Without changing the margin width, change the margin position. Touch [OK]. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-64 bizhub 750/600...
Place the original on the original glass. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Page Margin]. The Page Margin screen appears. bizhub 750/600 8-65...
Page 369
For a horizontal shift, touch [Left] or [Right] to specify the shift di- rection. For a vertical shift, touch [Top] or [Bottom] to specify the shift direction. Both a horizontal shift and a vertical shift can be specified together. 8-66 bizhub 750/600...
Page 370
If a value outside the allowable range is specified, the message “Input Error” appears. If “Input Er- ror” appeared or if the distance was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value. bizhub 750/600 8-67...
Page 371
Touch [OK] three times. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-68 bizhub 750/600...
Normally, copies are produced with the image erased from the area 1/8 in from the top, 1/6 in from the bottom, and 1/16 in on each side. If “Full Scan” is selected, the image is copied to the edges of the paper without erasing the areas mentioned above. bizhub 750/600 8-69...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Image Adjustment]. – To cancel all settings for the Application functions, touch [Reset]. The Image Adjustment screen appears. bizhub 750/600 8-71...
Page 375
If a value outside the allowable range is specified, the message “In- put Error” appears. If “Input Error” appeared or if the original size was incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value. 8-72 bizhub 750/600...
Page 376
“System Setting” on page 12-19. Touch [OK] twice. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-73...
3-77. For an original that exceeds 100 pages, refer “Scanning the Original in Separate Batches (“Separate Scan” Setting)” on page 3-11. The binding margin width is automatically specified. The “1>2” Simplex/Duplex setting is automatically selected. 8-74 bizhub 750/600...
Original” on page 3-7. Load the paper to be used into the desired paper tray. Touch [Application]. The Application screen appears. Touch [Booklet Pagination]. – To cancel all settings for the Application functions, touch [Reset]. The Booklet screen appears. bizhub 750/600 8-75...
Page 379
“To adjust the position of the binding margin (“Edit Margin” set- ting)” on page 8-65. Touch [OK]. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-76 bizhub 750/600...
Unwanted areas on all four sides of the original are erased. Center Erase Shading that appears along the center of the original is erased. Non-Image Area Erase The size of the original is detected, and any area not part of the orig- inal is erased. bizhub 750/600 8-77...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Erase]. – To cancel all settings for the Application functions, touch [Reset]. The Erase screen appears. 8-78 bizhub 750/600...
Page 382
To specify that no part of a side is to be erased, touch [None]. – Touch [↔] to switch between the integer and the fraction, touch[–] and [+] to specify the width to be erased, and then touch [OK]. bizhub 750/600 8-79...
Page 383
Touch [OK], and then touch [OK] in the next screen that appears. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-80 bizhub 750/600...
For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. Touch [Erase]. – To cancel all settings for the Application functions, touch [Reset]. The Erase screen appears. bizhub 750/600 8-81...
Page 385
To cancel the “Center Erase” function, touch [OFF]. – To cancel changes to the settings, touch [Cancel]. Touch [OK] twice. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. 8-82 bizhub 750/600...
Be sure to fully open the ADF before making copies, otherwise the copies will not be produced correctly. Touch [Application]. The Application screen appears. Touch [Erase]. – To cancel all settings for the Application functions, touch [Reset]. The Erase screen appears. bizhub 750/600 8-83...
Page 387
To cancel the “Non-Image Area Erase” function, touch [Non-Image Area Erase] again to deselect it. Touch [OK]. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-84 bizhub 750/600...
A previously scanned image can be stored on the hard disk and re- called when needed to be printed overlapping a document. (pro- grammed overlay output) (Refer to p. 8-102.) If the HDD is not installed, “Store Overlay” function is not available. bizhub 750/600 8-85...
Overlayed copy Overlapped image document To display the Stamp/Overlay screen Position the original to be copied. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Touch [Application]. The Application screen appears. bizhub 750/600 8-87...
Page 391
Application Functions Touch [Stamp/Overlay]. – To cancel all settings for the Application functions, touch [Reset]. The Stamp/Overlay screen appears. Select the desired Stamp/Overlay function. – The Stamp/Overlay functions can be used together. 8-88 bizhub 750/600...
Touch the buttons for the desired settings under “Date Type”, “Time Type” and “Pages”. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Date/Time” function, touch [OFF]. Can the time be omitted? % If “None” is selected, the time is not printed. bizhub 750/600 8-89...
Page 393
“Top & Bottom Adjustment”, and then use the keypad or touch [-] and [+] to specify the adjustment amount. – When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting. 8-90 bizhub 750/600...
To copy using the “Page #” function In the Stamp/Overlay screen, touch [Page #]. – For details on displaying the Stamp/Overlay screen, refer to “To display the Stamp/Overlay screen” on page 8-87. The Page # screen appears. bizhub 750/600 8-91...
Page 395
To cancel the “Page #” function, touch [OFF]. Specify the page number type. – To specify settings for cover pages and insertion sheets or if there are inserted pages, continue with step 4. – If there are no insertion sheets, skip to step 6. 8-92 bizhub 750/600...
Page 396
“Skip the page(s)” is selected, the page number is not counted and the page is left blank. The sheet setting screen appears. To specify settings for the pages to be printed on, and then touch [OK]. The Page # screen appears again. bizhub 750/600 8-93...
Page 397
“Top & Bottom Adjustment”, and then use the keypad or touch [-] and [+] to specify the adjustment amount. – When using the keypad to specify the settings, press the [C] (clear) key, and then type in the setting. 8-94 bizhub 750/600...
Page 398
% To make no left/right or up/down adjustments, touch [No Adj.]. Touch [OK]. The Print Position screen appears. Touch [OK] two times. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-95...
If “Start Number” is set to “1”, “0001” is printed. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Set Numbering” function, touch [OFF]. Touch a button under “Text Density” and “Pages” to specify the de- sired settings. 8-96 bizhub 750/600...
Page 400
Application Functions Touch [Change Size], and then select the character size. Touch [OK] twice. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-97...
The Built-In Stamp screen appears. Select the preset stamp. – Touch [Change Size], and then select the character size. – To cancel changes to the settings, touch [Cancel]. – To cancel the “Built-In Stamp” function, touch [OFF]. 8-98 bizhub 750/600...
Page 402
[C] (clear) key to erase the value, and then specify the cor- rect value. Touch [OK] four times. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. bizhub 750/600 8-99...
– To cancel the “Watermark” function, touch [OFF]. Touch [OK] twice. The Watermark screen appears again. If necessary, specify any other copy settings. Using the keypad, type in the desired number of copies. Press the [Start] key. 8-100 bizhub 750/600...
Position the original to be overlapped. – For an original that exceeds 100 pages, refer to “Scanning the Orig- inal in Separate Batches (“Separate Scan” Setting)” on page 3-11. Press the [Start] key. The loaded original is scanned. Touch [Finish]. bizhub 750/600 8-101...
In the Stamp/Overlay screen, touch [Store Overlay]. – For details on displaying the Stamp/Overlay screen, refer to “To display the Stamp/Overlay screen” on page 8-87. The Recall Image Overlay screen appears. Touch [Store Overlay Image]. The Store Image Overlay screen appears. 8-102 bizhub 750/600...
Page 406
Load the one page original in the ADF or position it on the original glass. – For details on positioning the original, refer to “Positioning the Orig- inal” on page 3-7. Press the [Start] key. The Basic screen appears again. bizhub 750/600 8-103...
Page 407
For an original that exceeds 100 pages, refer to “Scanning the Orig- inal in Separate Batches (“Separate Scan” Setting)” on page 3-11. Using the keypad, type in the desired number of copies. Press the [Start] key. The loaded original is scanned. Touch [Finish]. Press the [Start] key. 8-104 bizhub 750/600...
It is recommended that the toner cartridge be replaced when the mes- sage “Toner Cartridge needs to be replaced.” appears. When the message“Replace the toner” appears, the machine is stopped. When the toner is empty, the warning message shown below appears and copies can no longer be made. bizhub 750/600...
When the toner is empty, the screen shown below appears. Touch to display the message enlarged. 7 WARNING Handling toner and the toner cartridges Do not throw toner or the toner cartridge into a fire. Toner expelled from the fire may cause burns. bizhub 750/600...
To replace the toner cartridge Open the toner cartridge door. Pull out the cartridge holder. While pulling the toner- cartridge-securing lever toward you, pull the car- tridge holder out toward you as far as possible. bizhub 750/600...
Page 412
The toner within the toner cartridge may have become com- pacted. If it has, be sure to shake the toner cartridge until the toner is mostly broken up before in- stalling the cartridge. Remove the cover from the toner cartridge. bizhub 750/600...
Page 413
With the label at the end of the toner cartridge facing up, insert the bot- tom of the cartridge into the slot in the cartridge holder. Return the cartridge holder to its original po- sition, and then close the toner cartridge door. bizhub 750/600...
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Replacing the Staples When finisher FS-504/FS-505/FS-602 is installed and is about to run out of staples, the message shown below appears. Display in Enlarge Display Mode bizhub 750/600...
“Replace Staple Cartridge 1” or “Replace Staple Cartridge 2” ap- pears. To replace the staple cartridge for finisher FS-504/FS-505 Open the finisher door. Pull out the stacker unit. – Hold the stacker unit handle, and then slowly pull out the stacker unit as far as possible. bizhub 750/600...
Page 416
Install the new staple cartridge. – Push up the staple cartridge, and then check that the car- tridge is securely in- stalled. Return the stacker unit to its original position. bizhub 750/600...
Page 417
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Close the finisher door. 9-10 bizhub 750/600...
Replacing Toner Cartridges and Staples and Emptying Dust Boxes To replace the staple cartridge for finisher FS-602 Open the finisher door. Pull out the stacker unit. – Hold the stacker unit handle, and then slowly pull out the stacker unit as far as possible. bizhub 750/600 9-11...
Page 419
While lifting the lever on the staple car- tridge, pull the car- tridge toward you to remove it. – Remove the staple cartridge by guiding it along the rails. Remove the empty car- tridge case from the sta- ple cartridge. 9-12 bizhub 750/600...
Page 420
Install the staple cartridge. – Place the staple car- tridge on the rails, and then guide it back to its original position. – Push down the sta- ple cartridge, and then check that the cartridge is securely installed. bizhub 750/600 9-13...
Page 421
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Return the stacker unit to its original position. Close the finisher door. Reminder Do not remove the remaining staples, otherwise the machine will not be able staple after the cartridge is replaced. 9-14 bizhub 750/600...
Emptying the Dust Boxes To empty the dust box of the punch kit If the punch dust box in punch kit PK-505 installed on finisher FS-504/FS- 505/FS-602 becomes full, the message shown below appears. Display in Enlarge Display Mode bizhub 750/600 9-15...
Page 423
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Open the finisher door. Pull out the punch dust box. Empty the punch dust box. 9-16 bizhub 750/600...
Close the finisher door. To empty the dust box of the Z folding unit If the punch dust box in Z folding unit ZU-602 installed on finisher FS-504/ FS-505/FS-602 becomes full, the message shown below appears. bizhub 750/600 9-17...
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Display in Enlarge Display Mode Open the finisher door. 9-18 bizhub 750/600...
Page 426
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Pull out the punch dust box. Empty the punch dust box. Install the punch dust box into its original posi- tion. bizhub 750/600 9-19...
Page 427
Replacing Toner Cartridges and Staples and Emptying Dust Boxes Close the finisher door. 9-20 bizhub 750/600...
Reminder Be sure to turn off the machine (set the power switch to “o”) before cleaning it. Never use solvents, such as benzene or thinner, to clean the main body. 10-2 bizhub 750/600...
Never use solvents, such as benzene or thinner, to clean the original glass. Left Partition Glass Clean the left partition glass by wiping it with a soft, dry cloth. Reminder Never use solvents, such as benzene or thinner, to clean the left partition glass. bizhub 750/600 10-3...
ADF platen guide cover Clean the ADF platen guide cover by wiping it with a soft, dry cloth. Reminder Never use solvents, such as benzene or thinner, to clean the ADF platen guide cover. 10-4 bizhub 750/600...
Care of the Machine Paper Take-Up Roller Clean the paper take-up rollers by wiping them with a soft, dry cloth. Reminder Never use solvents, such as benzene or thinner, to clean the paper take- up roller. bizhub 750/600 10-5...
Touch [Details] in the sub display area. The list of counters appears. Can the list of counters be printed? % To print the list of counters, touch [Print], select the paper size and the “Simplex/Duplex” setting, and then press the [Start] key. 10-6 bizhub 750/600...
Page 434
Care of the Machine Touch [Close]. The Basic screen appears again. Note The list of counters can be displayed even while the machine is copying or printing. bizhub 750/600 10-7...
Care of the Machine 10.3 When the Message “Preventive maintenance time.” Appears If the message “Preventive maintenance time.” appears, contact your tech- nical representative and request a periodic maintenance inspection. 10-8 bizhub 750/600...
- From the Job List screen, the following tabs for various specific functions can be displayed. – Print: Lists print jobs for copying and computer printing – Scan: Lists scanner transmission jobs – RX: User Box Lists print jobs saved in boxes 11-2 bizhub 750/600...
Page 438
- The function of each button in the Job List screens is described below. A selected button indicates which job list is currently displayed. [Held Jobs], [Active Jobs], [Increase Priority], [Delete], and [Check Job] appear in the Current Jobs list on the Print tab. bizhub 750/600 11-3...
Page 439
[Scan] Displays the Scan tab of the Job List screen. For more details, refer to the Network scanner volume of the bizhub 750/600 User’s Guide. [RX/User Box] Displays the RX/User Box tab of the Job List screen. For more details, refer to the Facsimile Operations of the bizhub 750/600 User’s Guide.
Page 440
Displays the number of pages in the original. # of Sets Displays the specified number of pages to be printed. Result (Job History list only) Displays the result of the operation (Job Complete, Error Cleared, Deleted by User, Mode cancelled from conflict) bizhub 750/600 11-5...
– If an incorrect job was selected, select a different job or touch the button for the selected job again to deselect it. A message requesting confirmation to delete the job appears. 11-6 bizhub 750/600...
Page 442
The screen that was displayed before [Job List] was touched appears again. Note If user authentication settings have been applied and the machine is set so that jobs cannot be deleted by other users, the job is not deleted. bizhub 750/600 11-7...
To finish checking the settings, touch [Close] or [Exit], or press the [Re- set] key. – To return to the Job List screen, touch [Close]. – To return to the Basic screen, touch [Exit] or press the [Reset] key. 11-8 bizhub 750/600...
Name, Time Stored, # of pgs., # of Sets, Output Tray, File Name Displayed only for jobs in the Current Jobs list Displayed only for jobs in the Job History list Displayed only for Current Jobs transmitted to multiple recipients bizhub 750/600 11-9...
To return to the Job List screen, touch [Close]. – To return to the Basic screen, touch [Exit] or press the [Reset] key. Detail To delete a queued job or job being performed, touch [Delete] in the Check Detail screen. 11-10 bizhub 750/600...
“To print a stored job” on page 11-15. To give priority for output to a job, touch [Increase Priority] in the Active Jobs list. For more details, refer to “To increase priority for printing” on page 11-18. bizhub 750/600 11-11...
Deleted Jobs: Displays only jobs that were deleted before they were finished – Finished Jobs: Displays only jobs that were correctly completed – Active Jobs: Displays all jobs The history of jobs of the selected type is displayed. 11-12 bizhub 750/600...
% Touch [Stop]. Touch [OK]. – After the single sample copy is printed, check the print result. – To exit the Release Held Job screen and return to the Active Jobs list in the Current Jobs list, touch [Cancel]. bizhub 750/600 11-13...
Page 449
Managing Jobs (Job List) Detail To change the settings, touch [Change setting] in the Release Held Job screen. For details, refer to “To print a stored job” below. 11-14 bizhub 750/600...
To quit removing a stored job, touch [Cancel]. – To change the specified copy settings, continue with step 4. – To continue without changing the specified copy settings, skip to step 8. Touch [Print]. [Change Setting] appears. bizhub 750/600 11-15...
Page 451
The screen for the selected copy setting appears. Can the copy settings be changed? % The following copy settings can be specified after a sample copy is printed. # of Sets, 1-Sided/2-Sided, Finishing, Folding, Page Margin, Stamp/Overlay, Cover Mode, Insert Sheet, Chapters 11-16 bizhub 750/600...
Page 452
11-13. In the Release Held Job screen, touch [OK]. The stored job appears in the Active Jobs list and is printed. How is the removal of a job from the Held Jobs list stopped? % Touch [Cancel]. bizhub 750/600 11-17...
If the job to be given priority is not displayed, touch [ ] and [ until the desired job is displayed. – If an incorrect job was selected, select a different job or touch the button for the selected job again to deselect it. 11-18 bizhub 750/600...
Page 454
Managing Jobs (Job List) The selected job moves to the top of the list and printing of the job be- gins. How is the changing of the output priority stopped? % Touch [Cancel]. bizhub 750/600 11-19...
Page 455
Managing Jobs (Job List) 11-20 bizhub 750/600...
For details on buttons marked with * or **, refer to page 12-44. For details on displaying buttons marked with ***, contact your technical representative. “(F)” indicates buttons that appear only when the fax kit is installed. For details, refer to the bizhub 750/600 User’s Guide [Facsim- ile Operations]. Utility/Counter...
Page 458
Output Setting** Fax** [2] Output Tray Setting** [7] Original Im- age Density** [2] Display Set- [1] Sub Screen p. 12-23 ting ( Display ON/OFF [2] Copier Set- No Rotate ting [3] Scan Basic Default Tab Screen Default Seeing bizhub 750/600 12-3...
Page 459
Auto Change When AMS Direc- tion is Incorrect Auto Zoom (Platen)* Auto Zoom (ADF)* Select Tray when APS OFF* Select Tray for Insert Sheet* Separate Scan Output Settings Exit Direction Of 1 Sheet (Platen)* Image Rotation (Platen)* 12-4 bizhub 750/600...
Page 460
2-Sided Print Bind Direction Staple Hole-Punch Banner Paper Tray [3] PCL Setting [1] Font Setting [2] Symbol Set [3] Font Size [4] Line/Page [5] CR/LF Mapping [4] PS Setting PS Error Print [5] Print Reports Configuration Page bizhub 750/600 12-5...
Page 461
Non-Business Hours [6] Restrict User [1] Restrict Access to Access Saved Program Jobs [2] Delete Saved Program Jobs [3] Restrict Access Changing Job to Job Settings Priority Deleting Other User’s Jobs Registering and Changing Addresses Changing Zoom Ratio 12-6 bizhub 750/600...
Page 462
Hor. Position [5] Punch Resist Loop Size [4] Z-Fold Position [1] 1st Z-Folded Adjustment Position [2] 2nd Z-Folded Position [5] Tri-Fold Position [6] 2 Position Staple [7] Post Inserter Tray Size [6] Scanner [1] Leading Edge Adjustment*** Adjustment*** bizhub 750/600 12-7...
Page 463
Size Setting*** inal Size Detect ADF Original Size Detect Original Glass Small Size Detect Original Size De- tect Change 1 Original Size De- tect Change 2 Original Size De- tect Change 3 Foolscap Size Setting 8K/16K Select 12-8 bizhub 750/600...
Page 464
[1] Subject (for E-mail) [2] Text [3] User Box [1] Public/Per- sonal User Box [2] Bulletin Board User Box [3] Relay User [4] Annotation User Box [4] One-Touch [1] Address Registration List Book List [2] Group List bizhub 750/600 12-9...
Page 466
Auto Zoom p. 12-42 ting ( (Platen) Auto Zoom (ADF) Select Tray when APS OFF Select Tray for Insert Sheet Image Rotation Print Jobs During Copy Operation Exit Direction Of 1 Sheet (Platen) Tri-Fold Printed Side Selection bizhub 750/600 12-11...
Page 467
Incorrect User Box No. Entry Tray Selection for RX Print Min. Reduction for RX Print Print Separate Fax Pages File After Poll- ing TX No. of Sets (RX) [5] Function [1] Function ON/ F-Code TX Setting OFF Setting 12-12 bizhub 750/600...
Registration]. One-Touch Registration Parameter Description Address Book Register recipients for scanning. For details, refer to the Network Scanner Operations of the bizhub 750/600 User’s Group Guide. Program Subject/Text (for E-mail) Note If user authentication has been set to “ON”, [1 One-Touch Registration] does not appear when no user has logged on.
Touch [1 One-Touch Registration]. – An item can also be selected by pressing the key in the keypad for the number beside the desired button. For “One-Touch Registration” press the [1] key in the keypad. The One-Touch Registration screen appears. bizhub 750/600 12-17...
Page 473
To quit specifying the Utility mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen for the Copy, Scan or Box mode appears. 12-18 bizhub 750/600...
• Standard Size 2: Select when loading paper of the following sizes: A4 w, A5 v, F4. • Custom Size: Select when using cus- tom-sized paper. • Oversized Paper: Select when paper larger than a standard size is being used. bizhub 750/600 12-19...
Page 475
Note To load paper of a different size into the tray 1 and 2 and the LCU, contact your technical representative. The Post Inserter settings are available only if optional post inserter PI- 501 is installed. 12-20 bizhub 750/600...
Page 476
[Power Save Setting] appears only if the “Administrator Security Level” parameter (displayed from the Administrator Setting screen) is set to “Level 1” or “Level 2”. Detail For details on the “Administrator Security Level” parameter, refer to “Se- curity Setting” on page 12-44. bizhub 750/600 12-21...
Page 477
Print/Fax Output Setting Specify the settings for the print and fax functions. For details, refer to the IC-202 User’s Guide and the bizhub 750/600 User’s Guide [Facsimile Operations]. Output Tray Setting Specify the exit tray given priority with...
Scan Basic Screen Default Setting Parameter Description Default Tab Specify settings for scanning. For details, refer to the Network Scan- ner Operations of the bizhub 750/600 User’s Guide. Program Default Address Book Default In- Address Type Symbol Display Copy Screen...
To change the default settings for Scan mode, press the [Scan] key, enter Utility mode, and then select a setting for this parameter. Detail For details on the default settings and the factory default settings, refer to “Automatically Canceling the Settings (Automatic Panel Reset)” on page 2-29. 12-24 bizhub 750/600...
(except when “Auto Paper Se- lect” is set). Auto Zoom (ADF) Select whether or not the “Auto Zoom” ON/ OFF setting is selected when a paper tray is selected (except when “Auto Paper Se- lect” is set). bizhub 750/600 12-25...
Page 481
Do Not Accept ation is being performed. • Accept: Print data can be accepted and print- • Receive Only: Print data is printed after the copy op- eration is finished. • Do Not Accept: Print data is not received. 12-26 bizhub 750/600...
Page 482
[Print Jobs During Copy Operation] appear only if the “Administrator Se- curity Level” parameter (displayed from the Administrator Setting screen) is set to “Level 2”. Detail For details on the “Administrator Security Level” parameter, refer to “Se- curity Setting” on page 12-44. bizhub 750/600 12-27...
Parameter Description Black Compression Specify settings for scanning. For details, refer to the Network Scan- Level ner Operations of the bizhub 750/600 User’s Guide. Printer Setting Parameter Description Basic Setting Specify settings for printing. For details, refer to the IC-202 User’s Guide.
– An item can also be selected by pressing the key in the keypad for the number beside the desired button. For “2 User Setting”, press the [2] key in the keypad. The User Setting screen appears. bizhub 750/600 12-29...
Page 485
To quit specifying the User mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key. Otherwise, cancel the User mode by touching [Close] in each screen until the screen for the Copy, Scan or Box mode appears. 12-30 bizhub 750/600...
Low Power mode. Entering Power Save Specify settings for faxing. For details, refer to the Facsimile Opera- Mode (Fax) tions and the Network Fax Operations of the bizhub 750/600 User’s Guide. Output Setting Parameter Description Settings (Default set- tings are underlined.)
Page 487
Specify the time of each day that the ma- – chine is turned on/off by the timer. Date Setting Specify the individual dates or the days – of the week that the machine is turned on/off by the timer. 12-32 bizhub 750/600...
Page 488
Allow/ Restrict Image with the “Store Overlay” function can be Overlay deleted or overwritten. Restrict Restrict Select whether to prevent multiple recip- ON/ OFF Operation Fax Broad- ients from being specified for fax trans- Setting casting missions. bizhub 750/600 12-33...
2nd-Side Size Adjust- The 2nd-side size can be adjusted for Tray 1 to 4, Bypass, LCU ment each tray. key: No Selection/ – – – 0.1%/ 0.2%/ 0.3% 12-34 bizhub 750/600...
Page 490
128 to 160 mm: 128 mm Staple can be adjusted in 0.1 mm increments. • Staple • Center Staple & Fold (FS-602) Post In- Adjust the post inserter tray size if the — serter Tray paper cannot be detected correctly. Size (PI-501) bizhub 750/600 12-35...
Page 491
1 minute matic system reset operation is per- formed. • System Auto Reset Time: Specify the setting for the desired length of time until the automatic sys- tem reset operation is performed. 12-36 bizhub 750/600...
Page 492
This machine detects that the user has changed when the optional key counter has been removed, when the magnetic card has been removed from the optional data controller, or when the [Access] key is pressed af- ter entering user authentication or account track information. bizhub 750/600 12-37...
Page 493
For details, contact your technical representative. Detail The “Original Size Detection Change 3” parameter specifies the detection of 8-1/2 × 14 and the Foolscap size. The size selected for the “Foolscap Size Setting” parameter can be changed. 12-38 bizhub 750/600...
750/600 User’s Guide. One-Touch Registration For details, refer to the Network Scanner Operations, Facsimile Op- List erations and Box Operations of the bizhub 750/600 User’s Guide. Note [3 User Box] appears only if the hard disk drive is installed. bizhub 750/600...
“OFF” and “Account Track” is set to “OFF”. When “# of Counters Assigned for Users” is set to “50”, 950 accounts can be registered. If the hard disk drive is not installed, the number of counters assigned for users is 100. 12-40 bizhub 750/600...
Page 496
The user and account track counters can be printed. In addition, single-sided or double-sided printing can be selected. Detail [Counter List] does not appear if “Public User Access” is set to “OFF” and “Account Track” is set to “OFF”. bizhub 750/600 12-41...
Utility Network Setting Parameter Description Network setting Specify settings for using the network. For details, refer to the Net- work Scanner Operations of the bizhub 750/600 User’s Guide. TCP/IP Setting NetWare Set http Server Setting FTP Setting SMB Setting AppleTalk Setting...
Page 498
Select whether the printed side is on the Outside/ Inside lection inside or the outside when the page is folded in three. Note [Tri-Fold Printed Side Selection] is available only if optional finisher FS- 602 is installed. bizhub 750/600 12-43...
The administrator password used to specify the Administrator mode 12345678 settings can be changed. User Box Admin. Setting Description Specify settings for using boxes. For details, refer to the Box Operations of the bizhub 750/600 User’s Guide. 12-44 bizhub 750/600...
Select whether or not a recipient can be Allow/ Restrict typed in manually in a recipient input screen. Print Data Capture Select whether or not data for a print job can be captured. For de- tails, refer to the IC-202 User’s Guide. bizhub 750/600 12-45...
Page 501
10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on immediately after being turned off. Note [Print Data Capture] appears only if optional image controller IC-202 is in- stalled. 12-46 bizhub 750/600...
HDD Setting Parameter Description Check HDD Capacity Specify settings for using boxes. For details, refer to the Box Oper- ations of the bizhub 750/600 User’s Guide. Temporary Data Over- write Setting Overwrite All Data HDD Lock Password HDD Formatting Select this parameter to format the hard disk.
Utility/Counter Touch [3 Administrator Setting]. – An item can also be selected by pressing the key in the keypad for the number beside the desired button. For “Administrator Setting”, press the [3] key in the keypad. 12-48 bizhub 750/600...
Page 504
For details on typing in text, refer to “Entering Text” on page 13-2. The Administrator Setting screen appears. Note To quit specifying the Utility mode setting, touch [Exit] in the sub display area or press the [Utility/Counter] key. Otherwise, touch [Close] in each screen until the desired screen appears. bizhub 750/600 12-49...
Touch [3 Printer Adjustment]. The Printer Adjustment screen appears. Touch [1 Leading Edge Adjustment]. The Leading Edge Adjustment screen appears. Touch the button for the paper type to be set. Touch [Test Copy]. The Test Copy screen appears. 12-50 bizhub 750/600...
Page 506
Touch [OK]. – To cancel changes to the settings, touch [Cancel]. The print position is adjusted. Note Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm bizhub 750/600 12-51...
Touch [3 Printer Adjustment]. The Printer Adjustment screen appears. Touch [2 Centering]. The Centering screen appears. Touch [Test Copy]. The Test Copy screen appears. Press the [Start] key. A test pattern is printed. Touch [Close]. The Centering screen appears. 12-52 bizhub 750/600...
Page 508
Touch [OK]. – To cancel changes to the settings, touch [Cancel]. The print position is adjusted. Note Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm bizhub 750/600 12-53...
Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [1 Center Staple Position]. The Center Staple Position screen appears. Touch the button for the paper size to be set. 12-54 bizhub 750/600...
Page 510
12.8 mm). – To scroll through the values quickly, touch [+] or [–] continuous- Repeat steps 6 through 11 until the desired print results are achieved. Touch [OK]. – To cancel changes to the settings, touch [Cancel]. bizhub 750/600 12-55...
The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [2 Half-Fold Position]. The Half-Fold Position screen appears. Touch the button for the paper size to be set. Touch [Test Copy]. The Test Copy screen appears. 12-56 bizhub 750/600...
Page 512
0.1 mm and 12.8 mm). – To scroll through the values quickly, touch [+] or [–] continuous- Repeat steps 6 through 11 until the desired print results achieved. Touch [OK]. – To cancel changes to the settings, touch [Cancel]. bizhub 750/600 12-57...
Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [3 Punch Adjustment]. The Punch Adjustment screen appears. Touch [1 Punch Vertical Position]. The Punch Vertical Position screen appears. 12-58 bizhub 750/600...
Page 514
Check the sample copy for the punch positions and for the center of the paper. If the desire print results are not achieved, change the adjustment val- – If the punch positions are too far above the center of the paper, touch [+] (between 0.1 mm and 5.0 mm). bizhub 750/600 12-59...
Page 515
Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters. Contact your technical representative. 12-60 bizhub 750/600...
Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [3 Punch Adjustment]. The Punch Adjustment screen appears. Touch [2 Punch Horizontal Position]. The Punch Horizontal Position screen appears. bizhub 750/600 12-61...
Page 517
Check the punch positions in the sample copy. If the desire print results are not achieved, change the adjustment val- – If the punch positions are too far on the right side of the paper, touch [+] (between 0.1 mm and 5.0 mm). 12-62 bizhub 750/600...
Page 518
Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters. Contact your technical representative. bizhub 750/600 12-63...
Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [3 Punch Adjustment]. The Punch Adjustment screen appears. Touch [3 Punch Unit Vert. Position]. The Punch Unit Vert. Position screen appears. 12-64 bizhub 750/600...
Page 520
Check the sample copy for the punch positions and for the center of the paper. If the desire print results are not achieved, change the adjustment val- – If the punch positions are too far above the center of the paper, touch [+] (between 0.1 mm and 5.0 mm). bizhub 750/600 12-65...
Page 521
Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters. Contact your technical representative. 12-66 bizhub 750/600...
Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [3 Punch Adjustment]. The Punch Adjustment screen appears. Touch [4 Punch Unit Hor. Position]. The Punch Unit Hor. Position screen appears. bizhub 750/600 12-67...
Page 523
Check the punch positions in the sample copy. If the desire print results are not achieved, change the adjustment val- – If the punch positions are too far on the right side of the paper, touch [+] (between 0.1 mm and 5.0 mm). 12-68 bizhub 750/600...
Page 524
Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm When PK-505 and ZU-602 are installed, adjustments can be made using both the “Punch Adjustment” and “Z-Fold Position Adjustment” param- eters. Contact your technical representative. bizhub 750/600 12-69...
Page 526
If the positions of the punched holes are not aligned on the paper, touch [+] and [–] to increase or decrease the adjustment (between –16.0 mm and 16.0 mm). If the adjustment value is large, the edge of the paper may become folded. bizhub 750/600 12-71...
Touch [1 System Setting]. The System Setting screen appears. Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [4 Z-Fold Position Adjustment]. The Z-Fold Position Adjustment screen appears. 12-72 bizhub 750/600...
Page 528
Touch [Test Copy]. The Test Copy screen appears. Press the [Start] key. The sample copy is printed. Touch [Close]. The 1st Z-Folded Position or 2nd Z-Folded Position screen appears again. Check the folding positions in the sample copy. bizhub 750/600 12-73...
Page 529
[+] (between 0.1 mm and 12.7 mm). 1st Z-Folded Position 2nd Z-Folded Position – If the folding position is too far on the right side of the paper, touch [–] (between –0.1 mm and –12.8 mm). 1st Z-Folded Position 2nd Z-Folded Position 12-74 bizhub 750/600...
Display the Administrator Setting screen. Touch [1 System Setting]. The System Setting screen appears. Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. Touch [5 Tri-Fold Position]. The Tri-Fold Position screen appears. bizhub 750/600 12-75...
Page 531
Check the folding positions in the sample copy. If the desire print results are not achieved, change the adjustment val- – If the folding position is too far on the right side of the paper, touch [+] (between 0.1 mm and 12.7 mm). 12-76 bizhub 750/600...
0 [6 2 Position Staple] appears only if finisher FS-602 is installed. Display the Administrator Setting screen. Touch [1 System Setting]. The System Setting screen appears. Touch [7 Expert Adjustment]. The Expert Adjustment screen appears. Touch [5 Finisher Adjustment]. The Finisher Adjustment screen appears. bizhub 750/600 12-77...
Page 533
Repeat steps 6 through 11 until the desired print results are achieved. Touch [OK]. – To cancel changes to the settings, touch [Cancel]. Note Enter the value by mm using the keypad. Refer to the conversion rate be- low. 1 in. = 25.4 mm 12-78 bizhub 750/600...
Load A4 w -size paper into the selected paper tray. Press the [Start] key. – Adjust the post inserter tray. To adjust the other paper tray, repeat steps 6 through 8. Touch [Close]. – The Finisher Adjustment screen appears again. bizhub 750/600 12-79...
Limits on the number of pages printed – Management of personal boxes by each owner – Delete and restrict jobs of other users - Account track – Counters for printing/scanning from each account – Limits on the number of pages printed 12-80 bizhub 750/600...
(each user) and on each depart- ment (each account). Note The account track and user authentication settings can be specified sep- arately. Check the differences between these features, and then specify the appropriate settings. bizhub 750/600 12-81...
This setup is used when the machine is used by multiple employees with each employee performing multiple duties, which are to be totaled separate- ly. With this setup, totals can be maintained on each employee (each user) and on each duty of the employee (each account). 12-82 bizhub 750/600...
To cancel user authentication, touch [OFF]. – To use the user authentication function from an external server, touch [ON (External Server)], and then select the server type. – To use the user authentication function of this machine, touch [ON (MFP)]. bizhub 750/600 12-83...
Page 539
MFP: This machine can be used only with user authentication. – To require all information to be entered for user authentication and account tracking each time that the machine is used, touch [Do Not Synchronize]. 12-84 bizhub 750/600...
Page 540
The authentication method is set. Reminder Do not differentiate between uppercase and lowercase letters in the user name for the external server. Since the bizhub 750/600 cannot differenti- ate between uppercase and lowercase letters, the operation may not be performed correctly.
Page 541
PageScope Data Administrator. For details, refer to the User’s Guide for PageScope Data Administrator. If user authentication is changed from external server authentication to machine authentication, the data is not cleared. To cancel changes to the settings, touch [Cancel]. 12-86 bizhub 750/600...
% [2 User Authentication Setting] is not available if “User Authentica- tion” on the General Settings screen is set to “OFF”. Touch [1 Administrative Setting]. Touch [User Name List], and then touch either [ON] or [OFF]. Touch [Default Function Permission]. The Default Function Permission screen appears. 12-88 bizhub 750/600...
Page 544
Touch [Public User Key], and then touch either [Display] or [Do Not Dis- play]. This machine is set to display [Public User Access]. Note To limit machine use by authorized users, specify settings in the User Registration screen. bizhub 750/600 12-89...
The User Authentication/Account Track screen appears. Touch [2 User Authentication Setting]. The User Authentication Setting screen appears. Touch [2 User Registration]. The User Registration screen appears. Touch the button for the desired user. The User Registration screen for the selected user appears. 12-90 bizhub 750/600...
Page 546
Type in the password (up to 64 characters), and then touch [OK]. A screen for retyping the password appears. Retype the password specified in step 9, and then touch [OK]. The user password is set. Touch [E-Mail Address]. The E-Mail Address screen appears. bizhub 750/600 12-91...
Page 547
At this time, do not turn off the machine with the main power switch. Touch [OK]. The maximum number of prints allowed are set. Touch [Function Permission]. The Function Permission screen appears. 12-92 bizhub 750/600...
Page 548
The functions are selected in the following order: Copy → Scan → Box. – If no operation is permitted, user authentication cannot be per- formed. Touch [OK]. The function permissions are set. Touch [OK]. – To erase the current user, touch [Cancel]. bizhub 750/600 12-93...
To check the counter Display the Administrator Setting screen. – For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-48. Touch [4 User Authentication/Account Track]. The User Authentication/Account Track screen appears. 12-94 bizhub 750/600...
Page 550
User Counter screen for the current user. A confirmation mes- sage appears, asking whether the counter should be cleared. To clear the counters for the current user, touch [Yes]. The maximum number allowed is not cleared. Touch [Close]. bizhub 750/600 12-95...
For details on displaying the Administrator Setting screen, refer to “Displaying the Administrator Setting Screen” on page 12-48. Touch [4 User Authentication/Account Track]. The User Authentication/Account Track screen appears. Touch [3 Account Track Setting]. The Account Track Setting screen appears. Touch [1 Account Track Registration]. 12-96 bizhub 750/600...
Page 552
Touch the button for the desired account. The Account Track Registration screen appears. If “Account Name & Password” was selected: If “Password Only” was selected: How is the selected account information deleted? % Touch [Delete]. Touch [Account Name]. The Account Name screen appears. bizhub 750/600 12-97...
Page 553
A password that repeats the same character (for example, “11111111”) A password containing less than 8 characters A screen for retyping the password appears. Retype the password specified in step 9, and then touch [OK]. The account password is set. 12-98 bizhub 750/600...
Page 554
At this time, do not turn off the machine with the main power switch. Touch [OK]. The maximum number of prints allowed is set. Touch [OK]. – To cancel changes to the settings, touch [Cancel]. bizhub 750/600 12-99...
- Large Size: Shows the total number of printouts made on large-sized pa- Scan - Total: Shows the total number of pages scanned/the total number of pag- es printed - Large Size: Shows the total number of large-sized pages scanned/the to- tal number of pages printed 12-100 bizhub 750/600...
Account Track Counter screen for the current account. A confirmation message appears, asking whether the counter should be cleared. To clear the counters for the current account, touch [Yes]. The maximum number allowed is not cleared. Touch [Close]. bizhub 750/600 12-101...
Limitations on registering/changing characters 8 alphanumeric characters (case- • A password that consists of a repetition of the same sensitive) character cannot be registered. • The same password as one before being changed can- not be registered. 12-102 bizhub 750/600...
Page 558
Setting screen. Use the user password/account password when user authentication/ac- count track settings have been applied. For details on the “User Box Password” and “Password for the secure document”, refer to the bizhub 750/600 User’s Guide [Box Operations]. bizhub 750/600 12-103...
Security Setting—HDD Setting—HDD Lock Password The hard disk locking password is set. Security Setting—HDD Setting—HDD Encryption Setting— Specify the encryption key for Management Data Encryption Key management data. (When the optional security kit is installed) 12-104 bizhub 750/600...
Page 560
Security Setting—Security Details—Prohibit Functions Set to “Mode 2” and three times When Auth. Error or less for checking. Security Setting—Security Details—Secure Document Ac- Set to “Mode 2”. cess Method Security Setting—HDD Setting—Temporary Data Over- Set to “Mode 2”. write Setting bizhub 750/600 12-105...
Page 561
User’s Guide [Box Operations]. For details on the limitations placed on the user for printing, refer to the User’s Guide [Print Operations]. For details on canceling operation restrictions applied when authentica- tion failed, refer to “Security Setting” on page 12-44. 12-106 bizhub 750/600...
The keypad can also be used to type in numbers. Any of the following keyboards may appear. Example Password input screen: Screen for entering the name of a custom paper size: 13-2 bizhub 750/600...
Page 564
Appendix Touching [Shift] switches the keyboard display between lowercase letters (numbers) and uppercase letters (symbols). bizhub 750/600 13-3...
To change a character in the entered text, touch [←] and [→] to move the cursor to the character to be changed, touch [Delete], and then type in the desired letter or number. List of Available Characters Alphanumeric characters / (Space) symbols 13-4 bizhub 750/600...
Page 574
If the cover sheet is thick paper and the paper for the body text is plain paper while using the “Cover Mode” function, a Staple setting can also be selected. In any other case, the settings cannot be combined, the setting specified first is given priority, and a warning message appears. bizhub 750/600 13-13...
Page 575
If paper is fed from the post inserter PI-501, the settings can be used together. If a document is being scanned, the setting specified first is given priority, and a warning message appears. When scanning of the document is finished, the settings can be used together. 13-14 bizhub 750/600...
Page 579
Multi-page document scanning ..3-14 Power plug ........1-5 Power save key ......2-15 Power source ......... 1-17 Negative/positive reverse ....8-36 Preset zoom ratios ......3-37 Network connector ......2-4 Preventive maintenance time ..10-8 Network setting ......12-42 14-4 bizhub 750/600...
Page 580
..........2-5 Serial port ........2-4 Total counter ........2-5 Set numbering ....... 8-96 Touch panel ......2-3 2-15 Set range ........8-51 Touch panel adjustment ....4-37 Set zoom ratios ......3-42 Tray 1 ........2-3 2-41 bizhub 750/600 14-5...
Page 581
Watermark ........8-100 Weekly timer ........2-33 Working table ........2-3 Z folding unit ZU-602 ..2-7 2-13 Z-fold position adjustment ..12-72 Zoom minimal setting ....3-36 Zoom ratio setting ....3-38 3-43 Zoom settings ........ 3-34 14-6 bizhub 750/600...
Page 582
G This manual was printed using 100% post-consumer recycled paper. http://konicaminolta.com Printed in China Copyright 57AE97353G 2007. 1 2007...
Need help?
Do you have a question about the bizhub 750 and is the answer not in the manual?
Questions and answers