5
To set the "Key Repeat Start/Interval Time" function
The length of time until the setting begins to change after holding down [+]
or [-] in the Zoom screen or [Light] or [Dark] in the Density screen and the
length of time for the value to change in Enlarge Display mode can be
specified.
The factory default setting for "Time To Start" is 0.8 second and the setting
for "Interval" is 0.3 second.
0 The settings specified for the "Key Repeat Start/Interval Time" function
are only applied in the Enlarge Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 5-27)
2
Touch [Key Repeat Start/Interval Time] or press the [1] key in the
keypad.
The Key Repeat Start/Interval Time
screen appears.
5-28
Additional copy operations
bizhub 750/600 (Phase 2)