Konica Minolta BIZHUB 750 User Manual page 64

3
No. Part name
1 ADF (automatic document feeder)
2 Toner cartridge door
3 Working table
4 Sub power switch
5 Multiple bypass tray
6 Right-side door of the paper tray
7 tray 4
8 tray 3
9 tray 2
10 tray 1
11 Touch panel
12 Control panel
13 Front doors (left and right)
14 Exit tray
Note
The maximum angle that the ADF is opened can be adjusted in two
stages. For details, contact your technical representative.
3-4
Before making copies
Description
Automatically feeds one original sheet at a time for
scanning. If the double-sided original setting is se-
lected in the touch panel, the original is automatical-
ly turned over so that both sides can be scanned.
Referred to as the "ADF" throughout the manual.
Opened when replacing the toner cartridge (see
p. 10-6.)
Provides an area to temporarily place original and
other materials
Use to turn on/off machine operations, for example,
for copying, printing or scanning. When turned off,
the machine enters a state where it conserves ener-
gy.
Used when printing onto paper with a size not load-
ed into a paper tray or onto overhead projector
transparencies or trace paper
Holds up to 100 sheets of plain paper and 1 sheet
of overhead projector transparencies or trace pa-
per.
Referred to as the "bypass tray" throughout the
manual. (See p. 3-48.)
Opened when clearing paper misfeeds
Can be loaded with up to 500 sheets of paper
2
(80g/m ), and can be set to different paper sizes
(See p. 3-46.)
Can be loaded with up to 500 sheets of paper (80
2
g/m ), and can be set to different paper sizes (See
p. 3-46.)
Can be loaded with up to 1,000 sheets of paper (80
2
g/m ) (See p. 3-44.)
Can be loaded with up to 1,500 sheets of paper (80
2
g/m ) (See p. 3-44.)
Displays various screens and messages.
Used to specify the various machine settings (See
p. 3-17.)
Opened when clearing paper misfeeds
Collects printed pages
bizhub 750/600 (Phase 2)