Application functions
Copying with an overlapping image ("Image Overlay" function)
The "Separate Scan" setting is automatically selected.
1
In the Stamp/Overlay screen, touch [Image Overlay].
–
For details on displaying the Stamp/Overlay screen, refer to "To
display the Stamp/Overlay screen" on page 9-93.
2
If necessary, specify any other copy settings.
3
Touch [OK].
–
At this time, the "Auto Paper Select" and "Auto Zoom" settings are
automatically canceled, and the zoom ratio is set to "
The Application screen appears again.
4
Using the keypad, type in the desired number of copies.
5
Position the original for the overlapping image.
–
Load the one page original in the ADF or position it on the original
glass.
–
For details on positioning the original, refer to "Positioning the
original" on page 4-9.
6
Press the [Start] key.
The loaded original is scanned.
7
Position the original to be overlapped.
–
For an original that exceeds 100 pages, refer to "Scanning the
original in separate batches ("Separate Scan" setting)" on
page 4-13.
bizhub 750/600 (Phase 2)
9
1.0".
×
9-109