Konica Minolta BIZHUB 750 User Manual page 336

8
3
Touch [Custom Size].
– The Paper Size screen that appears differs depending on the paper
size type that is selected.
4
Type in the length (X) and width (Y) of the paper.
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 458.0 mm)
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (182.0 mm to 314.0 mm)
– If a value outside the allowable range is specified, the message
"Input Error" appears. Type a value within the allowable range. The
allowable range differs depending on the paper sizes.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
5
Touch [OK].
8-34
Copy paper/original
bizhub 750/600 (Phase 2)