Konica Minolta BIZHUB 750 User Manual page 616

13
– If "Limit" was selected, use the keypad to type in the maximum
number allowed.
– Touch [All Users] to apply the settings in the current screen to all
registered users. Touch [All Users], and then touch [OK] in the two
screens that appear to display a message and apply the settings to
all users. At this time, do not turn off the machine with the main
power switch.
17
Touch [OK].
The maximum number of prints allowed are set.
18
Touch [Function Permission].
The Function Permission screen appears.
19
Touch the button for the desired setting for each operation.
– To permit the operation to be performed, touch [Allow].
– To prohibit the operation to be performed, touch [Restrict].
– Touch [All Users] to apply the settings in the current screen to all
registered users. Touch [All Users], and then touch [OK] in the two
screens that appear to display a message and apply the settings to
all users. At this time, do not turn off the machine with the main
power switch.
– If a function available to the user is different from those specified by
the machine's default settings, another function is selected when
the user logs on. The functions are selected in the following order:
Copy % Scan % Box.
– If no operation is permitted, user authentication cannot be
performed.
13-108 bizhub 750/600 (Phase 2)
Utility