Konica Minolta BIZHUB 750 User Manual page 648

14
Function combination code keys
o : The functions can be combined.
, : The functions cannot be combined. The function set last has priority.
: The functions cannot be combined. The function set first has priority. A warning message
will appear.
: The functions cannot be combined. The function set first has priority. No warning mes-
sage will appear, or other functions will not be available after the first function is selected.
—: The functions cannot be combined.
The functions cannot be combined. A warning message will appear.
If non-standard-sized original pages are combined, a warning message appears.
The specified binding margin width is the binding margin width at the center of the page.
If the "Auto Zoom for Combine/Booklet" function was set to "Auto Display Zoom Ratio",
these settings cannot be combined. The setting specified last is given priority. If "OFF"
was selected, the settings can be combined.
If the "Book Copy" function is specified, the "Non-Image Area Erase" function and
"Centering" setting are automatically specified. If they are unnecessary, they can be can-
celed.
If the number of copies is set to "1", the "Offset" setting can be selected, but it is not ap-
plied.
If a zigzag-folded document is loaded, a message appears, instructing that the original
document be loaded into the ADF.
If a copy program is recalled, copies are produced with the currently selected paper tray
setting.
If the paper size that is selected is not compatible with the Staple or Punch settings, the
settings cannot be combined.
If PK-504/505 was installed and a function that uses paper from multiple paper trays is
set at the same time as a Punch setting, a warning message may appear and the settings
cannot be specified. For details, contact your technical representative.
The settings can be combined if "None" is selected under "Chapter Paper".
The settings cannot be combined if "Copy Insert" is selected under "Chapter Paper".
If the "Chapters" function is specified first, a warning message appears.
If the "Tri-Fold Printed Side Selection" parameter is set to "Outside" and the post inserter
PI-501 is selected for "Back Cover Paper" of the "Cover Mode" function, these settings
cannot be combined.
The setting specified first is given priority, and a warning message appears.
If the "Tri-Fold Printed Side Selection" parameter is set to "Inside", the settings cannot be
combined under the following conditions. The setting specified first is given priority, and
a warning message appears.
• When an optional paper tray is selected for "Front Cover Paper" or "Back Cover Paper"
of the "Cover Mode" function
• When combined with the "Insert Sheet" function
• When a Combine Originals setting is selected
• When the "Booklet" function is specified
• When the "Image Repeat" function is specified
The "Mixed Original" setting and "Group" setting can be combined; however, they cannot
be combined if a Staple setting is also selected.
14-14
Appendix
bizhub 750/600 (Phase 2)