Konica Minolta BIZHUB 750 User Manual page 394

9
5
Touch [Image Repeat].
The Image Repeat screen appears.
6
Select the layout method.
7
Touch [Auto Detect].
– If you wish to specify the scanning area, touch [Set Range], and
then specify the size of the scanning area. For details on specifying
a size, refer to "To repeat the specified area ("Set Range")" on
page 9-52.
– When the original is positioned into the ADF, the original size is
automatically detected when the [Start] key is pressed, so no
original size appears under "Scan Range".
– If [Auto Detect] was selected, the number of repeats is also
automatically specified. To specify the desired number of repeats,
refer to "To repeat the image the specified number of times
("Repeat")" on page 9-56.
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Image Repeat" function, touch [OFF].
9-50
Application functions
bizhub 750/600 (Phase 2)