To Set The "Enlarge Display Timer Setting" Function - Konica Minolta BIZHUB 750 User Manual

5

To set the "Enlarge Display Timer Setting" function

When the automatic system reset operation is performed in Enlarge Display
mode, a message requesting confirmation to cancel Enlarge Display mode
can be displayed.
In addition, it is possible to specify the length of time that the message
requesting confirmation to cancel Enlarge Display mode is displayed.
The factory default setting is [OFF].
0 The "Enlarge Display Timer Setting" function is available only in Enlarge
Display mode.
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 5-27)
2
Touch [Enlarge Display Timer Setting] or press the [2] key in the
keypad.
5-30
Additional copy operations
bizhub 750/600 (Phase 2)