Utility
10
Check the folding positions in the sample copy.
11
If the desire print results are not achieved, change the adjustment
value.
–
If the folding position is too far on the right side of the paper, touch
[+] (between 0.1 mm and 12.7 mm).
–
If the folding position is too far on the left side of the paper, touch
[-] (between -0.1 mm and -12.8 mm).
12
Repeat steps 6 through 11 until the desired print results are achieved.
13
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
bizhub 750/600 (Phase 2)
13
13-91