Specifying User Settings; System Setting - Konica Minolta BIZHUB 750 User Manual

13
13.3

Specifying user settings

This section describes the main parameters and operations that can be
performed after pressing the [Utility/Counter] key, then touching [2 User
Setting].

System setting

Language Selection
Description
Select the language of the Touch Panel messages.
Measurement Unit Setting
Description
Select one of the measurement units in which values are displayed
in the touch panel.
Paper Tray Setting
Parameter
Paper
Type
13-26
Description
Paper Select one of the types for paper loaded
Type into each paper tray.
Paper Size Select one of the following sizes for pa-
per loaded into the tray 3 and 4.
• Standard Size 1: The size of standard-
sized paper is automatically detected.
• Standard Size 2: Select when loading
paper of the following sizes: 8-1/2 e
14w, 8-1/2 e 11w, 5-1/2 e 8-1/2v,
F4, 8Kv, 16Kw / v.
• Custom Size: Select when using cus-
tom-sized paper.
• Oversized Paper: Select when paper
larger than a standard size is being
used.
Settings (Default set-
tings are highlighted
English /Ger-
man/French/Ital-
ian/Spanish
Settings (Default set-
highlighted
tings are
mm (Numerical Value)
inch (Numerical Value)/
inch (Fraction)
Settings (Default set-
tings are highlighted
Norma l/ Thick Paper/
Thin Paper/ User 1/ User
2/ User 3/ Tab Paper/
Recycled/ Colored Pa-
per/ Special Paper/Fine/
Label/ Letterhead
Standard Size 1 / Stand-
ard Size 2/ Custom Size/
Oversized Paper
bizhub 750/600 (Phase 2)
Utility
.)
.)
/
.)