Konica Minolta BIZHUB 750 User Manual page 571

Utility
7
Touch [Test Copy].
The Test Copy screen appears.
8
Press the [Start] key.
A test pattern is printed.
9
Touch [Close].
The Leading Edge Adjustment screen appears again.
10
Check the distance (a) from the
starting print position of the test
pattern to the edge of the paper.
11
If the desire print results are not achieved, change the adjustment
value.
– To increase distance (a), touch [+].
– To reduce distance (a), touch [–].
– To scroll through the values quickly, touch [+] or [–] continuously.
12
Repeat steps 7 through 11 until the desired print results are achieved.
13
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
The print position is adjusted.
bizhub 750/600 (Phase 2)
a
13
13-63