Specifying The Method Of Setting The Transmission Source/Reception Information (Header/Footer Position) - Konica Minolta bizhub C451 User Manual
Bizhub c451 fk-502 fax operations user guide
Hide thumbs
Also See for bizhub C451:
- User manual (808 pages) ,
- Copy operations (610 pages) ,
- Operation manual (304 pages)
Table of Contents
Advertisement
Utility mode
10.15 Specifying the method of setting the transmission
source/reception information (Header/Footer Posi-
tion)
The location where Header and Footer is added is specified.
The location where Header and Footer is added is of following type respec-
tively.
Header Position
- Inside Body Text: Transmission source information is written on the orig-
inal and then printed.
- Outside Body Text*: Transmission source information is printed on the
outer side of the original.
- OFF: Transmission source information is not printed. (This setting is not
available for the North American model.)
Print Receiver's Name (This setting is not available for the North American
model.)
- ON*: Sender name and destination is printed as transmission source in-
formation.
- OFF: Sender name and fax number is printed as transmission source in-
formation.
Footer Position
- Inside Body Text: Reception time and reception number are printed as a
superscript on the received original.
- Outside Body Text: Reception time and reception number is printed be-
low the received original.
- OFF*: Reception information is not printed.
* is a default value at the time of procurement.
C451
10
10-55
Advertisement
Table of Contents
