Adjusting The Hole-Punching Positions (Punch Horizontal Position) - Konica Minolta BIZHUB 750 User Manual

Utility

Adjusting the hole-punching positions (Punch Horizontal Position)

When PK-504/505 is installed, the horizontal position of the punched holes
can be adjusted.
0 Use the "Punch" function to print a single sample copy, and then perform
the adjustment while checking the sample that was created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer
to"Displaying the administrator setting screen" on page 12-46.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [3 Punch Adjustment].
The Punch Adjustment screen appears.
6
Touch [2 Punch Horizontal Position].
The Punch Horizontal Position screen appears.
bizhub 750/600
12
12-61