Konica Minolta BIZHUB 750 User Manual page 534

12
– If the punch positions are too far below the center of the paper,
touch [–] (between -0.1 mm and -5.0 mm).
13
Repeat steps 7 through 12 until the desired print results are achieved.
14
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
Note
When PK-504/PK-505 and ZU-601/ZU-602 are installed, adjustments
can be made using both the "Punch Adjustment" and "Z-Fold Position
Adjustment" parameters. Contact your technical representative.
12-66
Utility
bizhub 750/600