Positioning The Original; To Position The Original Into The Adf - Konica Minolta BIZHUB 750 User Manual

Basic copy operations
3.3

Positioning the original

The original can be fed in either of the following two ways. Be sure to position
the original correctly according to the type of original being copied.
Document Feed Method
Using the ADF
Using the original glass

To position the original into the ADF

0 For details on the types of original that can be loaded into the ADF, refer
to "Originals" on page 7-37.
0 Do not load original that are bound together, for example, with paper
clips or staples.
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise an original misfeed or damage
to the original or machine may occur. However, an original that exceeds
100 pages can be scanned in separate batches. For details, refer to
"Scanning the original in separate batches ("Separate Scan" setting)" on
page 3-13.
0 If the original is not loaded correctly, the original may not be fed in
straight or an original misfeed or damage to the original may occur.
1
Position the original face up in the
ADF.
– Position the original pages so
that the top of the original is to-
ward the back or the right side of
the machine.
bizhub 750/600
Features
By using the ADF, a multi-page original can be fed automati-
cally. This feed method can also be used with double-sided
original, and is perfect for multi-page double-sided original.
The document is placed face down directly on the original
glass, then scanned. This method is best with books and oth-
er documents that cannot be fed through the ADF.
3
3-9