Automatically Canceling The Settings (Automatic Panel Reset); Automatically Canceling The Mode Screen (Automatic System Reset) - Konica Minolta BIZHUB 750 User Manual

Hide thumbs Also See for BIZHUB 750:

Table of Contents

Automatically canceling the settings (Automatic Panel Reset)

If the [Reset] key is not pressed and no operation is performed for a specified

length of time, settings that have not been programmed, such as the number

of copies, are cleared and return to their default settings.

This is the automatic panel reset operation.

As the factory default, the automatic panel reset operation is performed after

The length of time until the automatic panel reset operation is performed

and whether or not it is performed can be set from the Utility mode. For

details, refer to "System setting" on page 12-19.

If no operation is performed for a specified length of time, the screen is au-

tomatically changed to that for the mode given priority.

This is the automatic system reset operation.

As the factory default, the Copy mode screen is displayed after 1 minute.

The mode screen that is displayed when the automatic system reset op-

eration is performed can be changed from the Utility mode. For details,

refer to "System setting" on page 12-19.

Before making copies

bizhub 750/600