Application functions
4
Touch [Center Erase].
The Center Erase screen appears.
5
Specify the area to be erased. Touch [-] and [+] or use the keypad to
specify the width to be erased.
–
When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
–
If a value outside the allowable range is specified, the message "In-
put Error" appears. If "Input Error" appeared or if the distance was
incorrectly entered, press the [C] (clear) key to erase the value, and
then specify the correct value.
–
To cancel the "Center Erase" function, touch [OFF].
–
To cancel changes to the settings, touch [Cancel].
bizhub 750/600
8
8-79