Konica Minolta BIZHUB 750 User Manual page 417

Application functions
3
Touch [Print Position], and then select the printing position.
– To make fine adjustments to the printing position, continue with
step 4.
– To not make fine adjustments, skip to step 6.
4
Touch [Change Adjustment].
– Select the desired direction under "Left & Right Adjustment" or
"Top & Bottom Adjustment", and then use the keypad or touch [-]
and [+] to specify the adjustment amount.
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
If a value outside the allowable range is specified, the message "In-
put Error" appears.
If "Input Error" appeared or if the distance was incorrectly entered,
press the [C] (clear) key to erase the value, and then specify the cor-
rect value.
bizhub 750/600
8
8-97