Konica Minolta BIZHUB 750 User Manual page 413

Application functions
– To make fine adjustments to the printing position, continue with
step 8.
– To not make fine adjustments, skip to step 10.
8
Touch [Change Adjustment].
– Select the desired direction under "Left & Right Adjustment" or
"Top & Bottom Adjustment", and then use the keypad or touch [-]
and [+] to specify the adjustment amount.
– When using the keypad to specify the settings, press the [C] (clear)
key, and then type in the setting.
– If a value outside the allowable range is specified, the message "In-
put Error" appeared.If "Input Error" appeared or if the adjustment
value was incorrectly entered, touch [No Adj.]or press the [C] (clear)
key, and then specify the correct value.
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adj.].
9
Touch [OK].
The Print Position screen appears.
10
Touch [OK] two times.
11
If necessary, specify any other copy settings.
12
Using the keypad, type in the desired number of copies.
13
Press the [Start] key.
bizhub 750/600
8
8-93