Konica Minolta BIZHUB 750 User Manual page 505

Utility
Parameter
Scanner
Adjust-
ment
ADF Centering
!
Detail
When PK-504/PK-505 and ZU-601/ZU-602 are installed, adjustments
can be made using both the "Punch Adjustment" and "Z-Fold Position
Adjustment" parameters. Contact your technical representative.
List/Counter
Parameter
Management List
Paper Size/Type Counter
LCD backlight setting
Description
Adjust the brightness of the touch panel back-
light to one of 16 levels.
bizhub 750/600
Description
Leading The starting scanning position (document feed direction) of the doc-
Edge Ad- ument can be adjusted. For details on making this adjustment, con-
justment tact your technical representative.
Centering The starting scanning position (transverse document feed direction)
of the document can be adjusted. For details on making this adjust-
ment, contact your technical representative.
Vertical If the copy image is distorted (stretched or compressed), the zoom
Adjust- ratio in the document feed direction for the scanner can be adjusted.
ment For details on making this adjustment, contact your technical repre-
sentative.
If the center position cannot be automatically adjusted in the trans-
verse document feed direction, it can be adjusted manually. For de-
tails on making this adjustment, contact your technical
representative.
Job Settings List
Settings (Default set-
tings are underlined.)
Description
The machine settings can be printed.
Store up to 9 combinations of paper sizes
and paper types to be counted.
Settings (Default settings are underlined.)
1 to 16: 8
12
12-37