Main Messages And Their Remedies - Konica Minolta BIZHUB 750 User Manual

Troubleshooting
5.6

Main messages and their remedies

Message
Original left on glass.
Matching paper size is
not available.
Select paper size.
Original size cannot be
detected.
Select paper size.
This mode cannot be set
with XXX.
The Exit Tray has
reached its capacity.
Please remove all pages
)
from section tray.
Input User Name and
Password to login.
Input Account Name and
Password to login.
Your account has
reached its maximum al-
lowance.
)
Section
)
Close Section prop-
erly.
Replenish paper.
Replace the Toner Car-
tridge.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode.
bizhub 750/600
Cause
The document was left on the
original glass.
Paper of a suitable size is not
loaded in a paper tray.
The document is not posi-
tioned correctly.
A document with a non-
standard size or with a size
too small to be detected is
loaded.
A setting was selected that
gives priority to the setting
selected first.
Since the maximum amount
of copies for the indicated fin-
isher exit tray has been ex-
ceeded, the machine is
unable to make copies.
User authentication settings
have been specified. Copies
cannot be made unless a
user name and its correct
password are entered.
Account track settings have
been specified. Copies can-
not be made unless an ac-
count name and its correct
password are entered.
The limit on the number of
copies that can be made has
been reached.
is open. Since a machine door or cov-
er is open or an option is not
installed correctly, the ma-
chine is unable to make cop-
ies.
The indicated tray has run out
of paper.
Since the toner has run out,
the machine is unable to
make copies.
The staples have run out.
Remedy
Remove the document from the
original glass.
Either select paper of a different size
or load paper of a suitable size.
Position the document correctly.
Select the correct paper size.
Make copies using only one of the
settings, for example, by canceling
the setting selected first.
Remove all copies from the indicat-
ed tray.
Type in your user name and pass-
word. (See p. 2-36.)
Type in your account name and
password. (See p. 2-40.)
Contact your administrator.
Make sure that all doors and covers
are closed and that all options are
installed correctly.
Load paper into the indicated tray.
(See p. 2-43, p. 2-45, p. 2-47,
p. 2-51.)
Replace the toner cartridge.
Replace the staple cartridge. (See
p. 9-7.)
5
5-17