Utility
8
Touch [Close].
The Centering screen appears.
9
Check the distances (b) from the
print position of the test pattern to
the edge of the paper.
10
If the desire print results are not achieved, change the adjustment val-
ue.
–
To increase distance (b), touch [+].
–
To reduce distance (b), touch [–].
–
Each time [+] or [–] is touched, the value is increased or decreased
by one increment.
11
Repeat steps 6 through 10 until the desired print results are achieved.
12
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
The print position is adjusted.
bizhub 750/600
b
12
12-51