Copy paper/original
3
Touch [Custom Size].
4
Specify the X and Y sides of the paper, and then touch [Store].
–
Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 458.0 mm)
–
Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (100.0 mm to 314.0 mm)
–
Check the illustration in the screen for the sides that are considered
as X and Y.
–
If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
–
If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
bizhub 750/600
7
7-17