To Position The Original On The Original Glass - Konica Minolta BIZHUB 750 User Manual

Basic copy operations

To position the original on the original glass

0 For details on the types of original that can be placed on the original
glass, refer to "Originals" on page 7-37.
0 Do not place objects weighing more than 6.8 kg on the original glass. In
addition, do not press down extremely hard on a book spread placed on
the original glass, otherwise the original glass may be damaged.
0 For thick books or large objects, make the copy without closing the ADF.
When an original is being scanned with the ADF open, do not look directly
at the light that may shine through the original glass. Although the light
that shines through the original glass is bright, it is not a laser beam and,
therefore, is not as dangerous.
1
Lift and open the ADF.
2
Position the original face down onto the original glass.
– Load the document pages so that the top of the original is toward
the back or the left side of the machine.
3
Align the original with the
the back-left corner of the measuring
guides.
– For details on selecting the origi-
nal orientation, refer to "Selecting
the original orientation (Original
Direction settings)" on
page 3-24.
– For details on selecting the posi-
tion of the binding margin, refer
"Selecting the position of the binding margin (Margin settings)" on
page 3-28.
bizhub 750/600
When loaded in the
v orientation:
When loaded in the
w orientation:
mark in
3
Measuring guides
3-11