Adjusting The Pitch Of The Two Staples - Konica Minolta BIZHUB 750 User Manual

Utility

Adjusting the pitch of the two staples

The distance between the two staples can be adjusted.
0 Use the "2 Position" Staple function to print a single sample copy, and
then perform the adjustment while checking the sample that was created.
0 This parameter is available only if optional finisher FS-602 is installed.
1
Display the Administrator Setting screen.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [6 2 Position Staple].
The 2 Position Staple screen appears.
6
Touch the button for setting to be specified.
7
Touch [Test Copy].
The Test Copy screen appears.
8
Press the [Start] key.
The sample copy is printed.
bizhub 750/600
12
12-79