Konica Minolta BIZHUB 750 User Manual page 432

9
5
Load the new cartridge case into the
staple cartridge.
– Align the side of the staple car-
tridge marked by the arrow with
the side of the cartridge case
marked by the arrow, and then
fully insert the staple cartridge.
– Carefully pull the seal off the car-
tridge case.
6
Install the staple cartridge.
– Place the staple cartridge on the
rails, and then guide it back to its
original position.
– Push down the staple cartridge,
and then check that the cartridge
is securely installed.
7
Return the stacker unit to its original
position.
9-12
Replacing toner cartridges and staples and emptying dust boxes
bizhub 750/600