System Board Switches - HP Kayak XU 04xx Technical Information

HP Kayak XU PC Workstation Technical Information
System Connectors and Switches

System Board Switches

Your PC Workstation's
system board switches
may look like either of the
examples documented
here.
Switches 2 through 5 are used for processor settings and should be
changed if the processor supplied with the PC Workstation is replaced
with a faster one.
Switches 6 to 10 are used as shown in the following table:
Switch
1 - RESERVED
6 - CLEAR CMOS
7 - CLEAR PASSWORD
8 - KEYBOARD POWER ON
9 - RESERVED
10 - BIOS RECOVERY
8 English
UP=OFF
DOWN=ON
Use Switch to:
Do not use (OFF — DEFAULT)
Retain or clear CMOS memory:
• OFF to retain CMOS memory — DEFAULT
• ON to clear CMOS memory.
Enable or clear (and disable) User and System Administrator Passwords
stored in EEPROM:
• OFF to enable passwords — DEFAULT
• ON to clear passwords.
Enable or disable power on using the keyboard:
• OFF to disable keyboard power on
• ON to enable keyboard power on — DEFAULT.
Do not use (ON — DEFAULT)
• OFF to enable normal mode — DEFAULT.
• ON to enable recovery mode.
OPEN=OFF
CLOSED=ON