Setting Image Capture Mode - Opticon OPI 2201 Specification Manual

17.3. Setting Image Capture Mode

Use the following settings to change the image capture mode. (Code reader mode
is enabled by default).
To set the scanner to image capture mode,
scan "ZZ", "D7I", "D7M", and "ZZ" in that order or use the 2D code setting.
To set the scanner to code reader mode,
scan "ZZ", "D37", "D7J", and "ZZ" in that order or use the 2D code setting.
Functions
SET
Image capture mode
Code reader mode
END
2D Code Settings:
Functions
Image capture mode
Code reader mode
Note: To adjust the brightness of the captured image refer to the following
gamma configuration settings.
Menu labels Menu codes
_ZZ_ ZZ
_+F_ +F
_+I_ +I
_ZZ_ ZZ
Menu labels
54
Opticon
OPI 2201
Specifications Manual