Page 1
Press and the scanner will beep Power LED Bluetooth LED Comm. LED USB Interface. For USB drivers, visit www.opticon.com/service-and-support.aspx RS232C Interface. Use the dedicated Opticon RJ50 to DB9 cable for the connection to a computer. 6V Power input Use the dedicated Opticon 6V/2A AC Adapter...
Page 2
STEP 4 - Make a Bluetooth connection between the scanner and the cradle. Scan the Bluetooth address label on the bottom of the CRD-3301 cradle. The scanner will then pair with the cradle and connect with it. Once the connection is established, the blue LED on the cradle will light up continuously.