Parts Of Scanner; Attaching Scanner To Adjustable Stand - Opticon LPN 1736 User Manual

Manual No. 25-ULPNMU01-01
Parts of the Scanner
1. Reading Window. Present the bar code to
this window to scan. Keep the window clean
and never obstruct this window in any way.
2. Trigger Button. If the scanner is OFF,
depressing this button turns it ON. If the
scanner is in the "sleep mode" use this button
to "wake up" the scanner.
3. Good Read Indicator. Indicators flashes
when bar code has been successfully read.
This feature can be inactivated if desired.
4. Buzzer/Beeper. Beeps to indicate when a bar
code has been successfully read. Loudness is
adjustable.
5. Cable. Connects scanner to your computer or
host terminal.
6. Label. Contains Product Identification and
Serial Number. Do not remove.

Attaching Scanner to Adjustable Stand

An adjustable mounting stand is provided for the
LPN1736. The scanner can be use with or without this
stand. The stand may make it more convenient to scan
items of different sizes.
To mount the scanner to the stand, insert the plastic
screw through the hole in the base of the scanner into the
hole in the arm of the stand. Tighten. The cable clamp
on the base can improve cable management.
LPN1736 Omni-Directional Laser Scanner
Page 5