Serial Remote Control - FLIR SR-100 Installation And Operation Manual

SR-100P
The SR-100P camera features a pressurized enclosure for added environmental protection and
the same focal length as the SR-100 camera (100mm, 7° FOV). This camera has a sealed and
pressurized outdoor enclosure that is designed to protect the camera and lens components in
adverse environmental conditions.
SR-50
Utilizing a 50mm lens, the SR-50 serves as a medium-range surveillance camera and provides
a 14° HFOV. This focal length is widely deployed because it provides an even balance between
situational awareness and detailed perspective.
SR-35
The SR-35 camera features a focal length of 35mm, providing a short to medium field of view of
20° and is well-suited for short range threat detection in all circumstances.
SR-19
The SR-19 camera features a focal length of 19mm (36° HFOV) and, like the other SR-series
cameras, has a standard resolution Focal Plane Array (FPA) with 320 (H) x 240(V) pixels. It
gives you an extremely wide field of view, so that you can cover a large area and keep excellent
situational awareness.
VSR-6
The VSR-6 is an extremely affordable thermal imager with a focal length of 6.3mm (52°
Horizontal Field of View or HFOV). It features the same thermal imaging technology found in
many of FLIR's most sophisticated security and surveillance systems, but is packaged for users
who have short-range security and surveillance as their primary application. The camera has a
standard resolution FPA that is windowed down to 160(H) x 120(V) pixels. The wide field of view
allows it to cover a large area and provide excellent situational awareness.
2.2

Serial Remote Control

The SR-Series cameras support serial communication for control of camera focus and other
features. Each camera is pre-configured at the factory to support either RS-232 or RS-422
protocol. The serial protocol is user-configurable via a switch on all cameras except SR-100 and
SR-100P.
The following table provides a list of the serial protocol supported on each SR-Series camera
model.
Camera Available Protocol
VSR-6
SR-19
User configurable as RS-232 or RS-422 via DIP switch, RS-232 default
SR-35
SR-50
SR-100
RS-422 Standard, RS-232 optional (factory option, not user-configurable)
SR-100P
427-0014-00-10 Revision 210
Table 1: Serial Communication Options
Copyright © 2008 FLIR Systems, Inc. 9