FLIR SyncroIP Camera Series Quick Setup Manual

SyncroIP
Camera Series
QUICK SETUP GUIDE
ATTENTION:
• This guide refers only to the software set-up.
• Broadband Router and Computer are required for local and
remote monitoring (not included).
Toll free tech support available after
completing product registration. For
more information on this product,
firmware updates, warranty and
accessory products, please visit:
www.flirsecurity.com
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, FLIR Systems, Inc. reserve the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE © 2013
FLIR Systems, Inc. All rights reserved.
!
ONVIF COMPATIBILITY AND INCLUDED SOFTWARE CONNECTION
NOTE: See the instruction manual for your camera
This camera is ONVIF v2.1 compliant. It is designed for
interoperability with popular VMS's and NVR's * , with for physical installation instructions.
backwards compatibility to ONVIF v.1.02. For more information
1
on ONVIF, visit www.onvif.org
The camera includes the following software options:
Milestone XProtect Go®
: A client/server solution
1
providing mobile applications and remote access
capabilities. Milestone XProtect® Go supports up to 8 IP
cameras. Upgrade options are available from Milestone.
For Milestone XProtect® Go documentation and support,
visit
www.milestonesys.com/Support-and-Upgrades/
Technical-Support
CMS-DH PRO A client-only solution with remote viewing
:
2
capabilities that supports up to 16 IP cameras and analog
cameras from Touch Series DVR's side-by-side via the Virtual
1. RJ45 Network Interface: Connect to a router or
DVR feature. CMS-DHS PRO does not support all the fea-
tures of the camera, such as microSD/SD card recording.
See the CMS-DH PRO manual on www.flirsecurity.com for
instructions.
Syncro-V A client-only solution with
3 :
remote viewing capabilities that supports up to 36 IP
2. Audio Input (RCA): Connect to a self-powered
cameras and supports all the features of the camera.
This Quick Start Guide provides the initial setup instructions
for accessing your camera using Syncro-V over a LAN and 3. Audio Output (RCA): Connect to an amplifier or
the Internet. For detailed instructions, see the Syncro-V
manual on www.flirsecurity.com.
4. DC12V (1A): 12V DC power input terminal. Make
* See www.flirsecurity.com for the most updated list of
third party VMS compatibility.
NOTE: Provided software is PC compatible only; Mac OS®
access to the cameras is available via Safari® browser only.
See the instruction manual for details.
Time
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time
Hand Tools Hardware Hi Speed
BA SI C I N S TA L L AT IO N G UI DE
STEP STEP
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
1
Skill Level
Hand Tools Hardware Hi Speed
Router
easy Intermediate advanced
Skill Level
CONNECTING THE CAMERA OVER THE LAN USING SYNCRO-V
easy Intermediate advanced
1
The camera has the following termination cables:
2
3
Ethernet Power - DC Audio IN Audio OUT
RJ45 (PoE )
switch on your network using RJ45 Ethernet cable
(Cat5e or better). 100Mhz connection. PoE supported
(class 3 PoE switch required).
IP ADDRESS: _______._______ ._______._______
NOTE: Use the included RJ45
coupler to connect to male end
4
of RJ45 Ethernet cable.
5
microphone for listen-in audio.
self-powered speaker for intercom/2-way audio.
6
sure to follow correct polarity (+/-) marked on the
power connector. See the instruction manual for your
camera for DC power requirements.
Time
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time
Hand Tools Hardware Hi Speed
L O C A L V IE W IN G IN STA L L AT IO N GU IDE
STEP
Time: 30 Minutes Hardware PC/ Skills - Intermediate
Router
2 under 15 minutes under 30 minutes under 60 minutes over 60 minutes 3
Router
Skill Level
Hand Tools Hardware Hi Speed
easy Intermediate advanced
Router
Skill Level
USING SYNCRO-V
easy Intermediate advanced
Install Syncro-V from the CD or from www.flirsecurity.com. Recording & Playback Options: You can record video to the hard
1
disk on the computer Syncro-V is installed on, a NAS device, FTP server,
Double-click the Syncro-V icon on the Desktop. The
or a microSD/SD memory card installed in the camera. You can also
login screen appears.
playback video from all the locations listed above.
See the Syncro-V manual on
Under User Name and
on setting up recording.
Password, enter the default
Syncro-V user name (admin) and
password (admin). Click Login.
Digital Zoom: You can zoom in on live video from your cameras.
2
• To zoom in, click and drag inside the display area.
• To return to default zoom, right-click inside window and click
Restore Panorama.
Syncro-V opens and scans the local network for connected cameras.
Detected camera IP addresses on the LAN appear in the Device List.
Write down the camera IP address below, you will need it for remote
networking setup.
Camera Setup: You can use Syncro-V to configure settings for your IP
3
cameras, such as the time and date or motion detection.
• To configure settings, click Device Manager > Video Device
Click on a camera IP address in Device List to login.
Management. Then, click the camera you would like to
configure.
Under User Name, enter the
user name for the camera
(default: admin). Under
Password, enter the
password for the camera
(default: admin). Click
Continue.
The camera appears under the
camera IP address. Click and
drag the camera to the display
grid to open it.
Click and drag
Time
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time
Hand Tools Hardware Hi Speed
BA SI C IN STA L L AT IO N GU ID E
Router
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Time: 20 Minutes Hand Tools Skills - Easy
Skill Level
Hand Tools Hardware Hi Speed
Router
easy Intermediate advanced
Skill Level
easy Intermediate advanced
www.flirsecurity.com for details
SyncroIP Series Quick Setup Guide - English - R3