Kbd300 Commands (Sr-100, Sr-100P) - FLIR SR-100 Installation And Operation Manual

10.0 KBD300 COMMANDS (SR-100, SR-100P)

Note: To start, type the device id (99 is the universal id) and then press CAM
Keystrokes
Near button
Far button
CW Joystick
CCW Joystick
1, Aux On
1, Aux Off
2, Aux On
2, Aux Off
3, Aux On
3, Aux Off
4, Aux Off
5, Aux Off
6, Aux On
6, Aux Off
7, Aux On
7, Aux Off
Some Pelco keyboards can produce very rapid commands when both of the focus buttons are
pressed simultaneously. These back to back commands can cause the SR camera to continue
to change its focus even when the focus buttons are released. Pressing and releasing either of
the focus buttons again will cause the camera to stop changing its focus and regular focusing
operations can be resumed.
427-0014-00-10 Revision 210
Camera Function
Increments Focus closer
Increments Focus farther
Turns on 2X Electronic zoom
Turns off 2X Electronic zoom
IR Polarity to Black Hot
IR Polarity to White Hot
Turns on 2X Electronic zoom
Turns off 2X Electronic zoom
Toggle: Plateau Values
Toggle: AGC Type
IR Flat Field Correction
Toggle: LUT Palette
Toggle: DDE gain in photon
Toggle: AGC ROI
Toggle: MID ITT in Photon
Toggle: Max gain value
Toggle Values (default to first
value)
Note: Holding the Near or Far button
down continuously will only move
the focus for three seconds. The
button must be let go and depressed
for further motion.
250, 300, 400, 50, 150, 200
Plateau, AutoBright, Linear, Plateau,
AutoBright, Linear
White, Black, Sepia, Color1, FireIce,
Rain
32, 64, 96, 128, 16, 24
Full, Horizon, Sky, Ground, Center,
Center (smaller)
140, 160, 200, 60, 100, 120
8, 10, 12, 2, 4, 6
Copyright © 2008 FLIR Systems, Inc. 37