Sr-Series Camera Specifications - FLIR SR-100 Installation And Operation Manual

9.0 SR-SERIES CAMERA SPECIFICATIONS

Feature VSR-6
FPA size (HxV) 160x120
Weight 4.6 lbs, 2.1
kg
Dimensions Refer to detailed drawings below in section 9.1
Sensor type Uncooled Microbolometer
Spectral range 7.5 to 13μm
Pixel pitch 38 microns
Input power 14V to 32VDC
range
18V to 27VAC
Nominal/Peak 6/16 W at 24VDC
Power Req.
Fuse 2 Amp fast-blow mini blade fuse,
Ex. Bussman BK/ATM-2 or
equivalent
Operating -32°C to 55°C (-25°F to 131°F)
Temp. Range
Storage -50° to 85°C
Temperature
Lens Heater Thermostat controlled
Analog video NTSC or PAL (EIA-170 or CCIR 624, respectively).
Camera focus Fixed focus (no adjustment needed)
Minimum 0.1 meters
Focus
Serial remote RS-232, RS-422
interface
User Control Windows-based application program
(known as TVIS User Interface GUI
or Photon GUI)
Connector Screw terminals (accepts tinned wire leads)
Style
Note: These specifications are subject to change without notice. Additional SR-100P
specifications provided in section 9.2
427-0014-00-10 Revision 210
SR-19 SR-35,
SR-50
320x240 320x240
4.6 lbs, 5.0 lbs,
2.1 kg 2.7 kg
Voltages as measured at the input to the electrical
interface board.
4/6 W at
24VDC
0.1 meters 1 meter,
4 meters
SR-100P Specifications.
Copyright © 2008 FLIR Systems, Inc.
SR-100 SR-100P
320x240 320x240
7.2 lbs, 3.3 11.5 lbs, 5.2
kg kg
8 /36 W at 8 /36 W at
24VDC 24VDC
3 Amp fast-blow mini blade
fuse, 3A/32V
Ex. Littelfuse 2970003 or
equivalent
Motorized focus mechanism
7 meters 7 meters
RS-422 (RS-232 available)
Via devices supporting Pelco-
D protocol or Windows-based
application program (TVIS-7
User Interface GUI)
16-pin mating
connector
32