Troubleshooting The Print Cycle - Minolta PAGEPRO PS PLUS Manual

Problems During the Data Transfer and Print Cycle

Troubleshooting the Print Cycle

Symptom
The Data indicator
does not light up and
the printer does not
start a print cycle.
The Message indica-
tor lights up and the
print cycle does not
start.
The print cycle cannot
be interrupted (the
Data indicator
remains on).
Personality does not
change.
Cause
The interface cable is
unplugged.
The interface cable
may not be compati-
ble with the specifica-
tions of the computer
and/or printer.
The printer has
detected an error. The
details of the error are
shown on the message
display.
Data is stored in the
printer's memory.
"Personality" in the
"Config Menu" is not
set to "Automatic."
Action
Connect it securely.
"Set-up Guide"
Check the model code
and specifications of
the interface cable and
make sure that they
are compatible with
the specifications of
the computer and
printer. "Set-up
Guide"
Determine the neces-
sary remedy. p. 7-6
Press the On Line key
to take the printer off
line. From the Reset
Menu run "Job &
Memory" to reset the
data stored in the
memory. Details,
Chapter 3
Press the On Line key
to take the printer off
line. Change the "Per-
sonality" setting in the
Config Menu to
"Automatic."
Details, p. 3-11
7-4