Table of Contents
Advertisement
Windows 3.1
Resolution
Select the resolution you want to print at.
provides highest
600 x 600
quality printing.
may print with a lower level of quality, but
300 x 300
will allow a job to print faster.
TrueType Options
This setting controls the way TrueType fonts are stored and printed by
the printer.
Normally, you should leave this setting at
, which enables
Automatic
the printer software to select the best data format and usually provides
the highest quality output and fastest printing speed.
Bitmap Soft Fonts
enables a font to be downloaded to printer memory
and stored as a soft font.
should only be used in the rare case when a TrueType font
Rasters
does not print exactly the way it appears on the screen. It can also be
used when printing characters that need to be clipped, or when a
document contains more soft fonts than will fit into printer memory.
Note, however, that "Rasters" also causes slower printing.
Print to file
Select this option when you want to save print data in a file instead of
sending it to the printer.
Draft Mode
This mode is designed to provide high-speed printing of trial
documents. Printing time will be decreased when this mode is
enabled, however graphics (bitmap data) will be printed as empty
frames.
5-58
Advertisement
Table of Contents
Troubleshooting
