Minolta PAGEPRO PS PLUS Manual page 60

Loading Paper: Loading Transparencies and Labels
How to Set the Paper Size for Tray 1
After loading the paper into Tray 1, set the corresponding paper size
in the control panel. For detailed instructions on setting the paper
size, refer to page 2-24.
How to Set the Media type for Tray 1
The default setting for this option is "PLAIN PAPER". Whenever
transparencies or labels are to be used in Tray 1, it is necessary to
make the printer setting changes for TRAY 1 MEDIA.
READY
READY
OFFLINE
PRINT MENU
1.
2.
Once
3.
3 times
Make sure that "READY" is
shown on the message
display and that the On Line
indicator is lit.
Press the On Line key on the
control panel.
Check that "OFFLINE"
appears on the message
display.
Make sure that the On Line
indicator goes out.
Press the Menu key three
times.
Check that "PRINT MENU"
appears on the message
display.
2-34