Minolta PAGEPRO PS PLUS Manual page 123

Windows NT 4.0
Paper Source
The Paper Source item specifies the tray from which paper is fed from
the printer. To change this setting, just select the desired paper source
from the drop-down list. Paper sources that are not available to your
printer are identified by the mark. If the desired tray is displayed
with the mark, make sure that it has been set to Installed in the
Device Settings tab of the Properties window.
By setting the paper source to Automatically Select, the printer will
automatically select a paper source that contains the paper size that is
best suited for the data to be printed.
Copy Count
This item specifies the number of copies to be printed. You can
specify any value from 1 to 9999.
4-29