Minolta PAGEPRO PS PLUS Manual page 46

Note
• Do not use legal size thick paper (the printer does not support legal
size thick paper).
• Do not use the following types of paper to avoid reduced print quality,
a misfeed or a print failure:
Paper already used in a thermal transfer printer or ink jet printer.
Paper that is too thin or too thick.
Paper folded, curled or torn.
Paper having binding holes or perforations.
Paper with surfaces that are too smooth or too rough or with varying
surfaces.
Paper having special coatings on their surfaces such as carbon
paper, heat-sensitive paper and pressure-sensitive paper.
Sheets of various sizes.
Paper not cut on right angles.
Paper bound by glue, staples or clips.
Paper affixed with labels which are easily removed.
Post cards that are warped or bent.
• Envelopes should meet the following requirements:
Sharp folds and edges.
General mailing envelopes without seals on the glued portion.
Those having flaps the full width of the envelope (unacceptable if
the flap is glued).
Wrinkle-free, no fasteners.
• Generally, envelopes perform well, but some types may wrinkle. We
strongly recommend testing any type of envelope before buying it in
large amounts.
• The Following transparencies are recommended:
For color printing, Minolta CF-200 (D) or 3M CG3710
For monochrome printing, Minolta M-100 (D) or 3M PP2500
• For more information, refer to page 2-21.
Paper
2-20