Minolta PAGEPRO PS PLUS Manual page 64

Loading Paper: Loading Transparencies and Labels
Note
Face-side up
The face of the
transparency should
be facing up
OK
NG
• Do not load additional transparencies on top of those remaining in the tray.
• Loading the transparencies with force may cause a misfeed.
4.
Paper
separator
Face down
Load the transparency stack
into the cassette, print side
down, under the paper
separator, and flush with the
front side of the cassette.
• Load the recommended
transparencies (Minolta CF
200-(D), 3MCG3710,
Minolta CF-100 (D) or 3M
PP2500) into the cassette so
that their front sides are
facing up .
• The transparencies should
be loaded no higher than the
maximum level indicator.
2-38