Table of Contents
Advertisement
Symptom
The printer takes
too long to out-
put prints.
Cause
The printer was in
Power Save mode
when the print com-
mand was issued.
The printer setting
was for color transpar-
ency (transparency
sheet) or thick paper
printing.
The amount of mem-
ory installed is not
sufficient to process
the print data.
Improving Print Quality
Action
Turn off the Power Save
setting if it is inconvenient.
Press the On Line key to
take the printer Off Line.
Using the Config menu,
change the Power Save set-
ting to "OFF". Details,
pp. 3-2, 3-4, 3-11
Wait a few moments.
Change the TRAY X
MEDIA setting or PRINT
MODE setting if they do
not correspond.
Print menu pp. 3-2, 3-4, 3-
8
Image menu. pp. 3-2, 3-4,
3-12
Install the optional expan-
sion memory, which will
allow the print cycle to run
faster.
7-26
Advertisement
Table of Contents
Troubleshooting
