Table of Contents
Advertisement
4
4.10
Mailbox transmission
This function is used to transmit a document to a mailbox. This is helpful
if only a specific person should be reading the message. However, both
machines must be of the same type.
The transmission is only executed if both mailbox ID codes are identical.
This prevents the document from being transmitted to an incorrect
mailbox.
The document is scanned into the remote fax machine's memory and can
only be printed if the recipient enters the correct 4-digit mailbox passcode.
Ask for the mailbox ID of the receiving machine before the transmission.
Insert the document face down in the document feeder. Adjust contrast
and resolution if necessary.
1
Press [FUNCTION] and [1] on
the numeric key pad.
2
Enter the number and press
[YES].
Use the numeric key pad to enter
3
the four-digit mailbox ID for the
recipient and press [YES].
4
Use the numeric key pad to enter
the 4 digit password, if required
and press [YES].
If the destination has not stored a
password, just press [YES].
The machine scans the document into memory.
4-28
3 MAIL BOX TX
(
=123456_
OK=YES
(DEL=NO)
MAILBOX ID =_
OK=YES
PASSWORD=_
OK= YES
Minoltafax 2800/3800
Send
Advertisement
Table of Contents
Troubleshooting
