Table of Contents
Advertisement
Reception
5
Reception
5.1
Manual reception
Basically, manual reception only makes sense if you are expecting voice
calls on the same line. You should keep this in mind when you set the
reception mode. Because the machine has no telephone receiver a
separate phone must be attached to the same telephone wall outlet. Plug
the telephone jack in the same outlet as the fax machine. Answer the call
and press [START].
Default reception setting
1
Press [SET] and 3 times [V/PIN
CODE].
Press [7] on the numeric keypad,
2
select the required setting using
the arrow keys and press [YES].
If you select AUTO, the system
will answer the calls automatically after the set number of rings. If
you select MANUAL, you have to take the receiver off the
telephone, wait for the fax signal and press [START].
3
Press [NO] to terminate the
entry.
Minoltafax 2800/3800
RX OPERATION?
YES / or 1-9
*AUTO
MANUAL
-SELECT&PUSH"YES"-
JAN. 09 13:00
-SET DOC. FACE DOWN-
5
s
t
100%
5-1
Advertisement
Table of Contents
Troubleshooting
