Changing One-Touch- Or Speed Dial Numbers - Konica Minolta Minoltafax 2800 User Manual

Data entry

Changing one-touch- or speed dial numbers

You can change one-touch/speed dial keys by following the procedure
below. The example below describes how to change a one-touch key.
Press [2] on the numeric keypad, enter the speed dial number and follow
the instructions.
You can switch between capital and small letter by pressing one touch key
[32]. Press [31] to add blanks. Enter special characters by pressing one
touch keys [28] and [29].
The one touch keys on the Minoltafax 3800 are assigned double function.
Select the second level [33] - [64] of the one touch keys by pressing the
corresponding key twice.
1 Press [SET].
2 Press [1] on the numeric keypad.
3 Press the desired one-touch key
and [YES].
4 Press [NO].
5 Select "enter" using the arrow
keys and press [YES].
6 Use the numeric keypad to enter
the number and press [YES].
7 Use the numeric keypad to enter
the new sub-address if required
and press [YES].
Minoltafax 2800/3800
DIAL REGISTRATION?
YES / or 1-6
-SELECT REGIST. KEY-
ONE-TOUCH 01
REGISTERED!
OK=YES (EDIT/DEL=NO)
*EDIT DELETE
-SELECT&PUSH"YES"-
(
=123456_
OK=YES (DEL=NO)
SUB=:_
OK=YES
3
s
t
KEEP?
3-19