On/Off Pushbuttons; Menu Pushbuttons; Rotary Select Knob - Magnum Energy ME-RC Owner's Manual

5..3 ON/OFF Pushbuttons

• ON/OFF INVERTER: This pushbutton toggles the inverter function on
and off. The green "INV" LED turns on and off with the pushbutton.
• ON/OFF CHARGER: This pushbutton toggles the charger function on and
off whenever the charger is actively charging. The green "CHG" LED turns
on and off with this pushbutton. This pushbutton is also used to initiate an
equalize charge; for more information on using the equalize charge feature,
see section 5.2.2 and the Equalizing Mode information on page 26.

5.. Menu Pushbuttons

These five menu pushbuttons provide quick access to menu items that can
help with configuring, monitoring and troubleshooting your inverter /charger
system.
• SHORE: This pushbutton allows you to set the appropriate breaker size
for the incoming utility/shore power and is used to control the amount of AC
amps the battery charger uses from the HOT 1 IN input; see section 3.2.1
for more detailed information.
• AGS: This pushbutton allows the networked Auto Generator Start (ME-
AGS-N) controller to be configured to specific system preferences and check
status of the AGS (when connected). Refer to the ME-AGS-N Owner's
Manual (part number: 64-0005) for detailed information on this menu.
• METER: This pushbutton provides meter information on the inverter/
charger system; see section 3.2.3 for more detailed information.
• SETUP: This pushbutton allows the inverter/charger to be configured
to your specific system preferences; see section 3.2.4 for more detailed
information.
• TECH: This pushbutton allows you to access menu selections that can
help service personnel with troubleshooting and also allows the factory default
setting to be restored; see section 3.2.5 for more detailed information.

5..5 Rotary SELECT Knob

The Rotary 'SELECT' knob is similar to a dash radio knob and used to easily
view and select various menu items and settings displayed in the LCD screen.
Turn the rotary knob clockwise and counterclockwise to view the different
menu items and available charger and inverter settings. Push or "SELECT"
the rotary knob to enter a menu item or to "save" a setting once they are
displayed on the LCD screen.
Info: All adjustable inverter/charger settings in the ME-RC (except
for the SHORE: Shore Max and SETUP: 08 Screen Setup settings -
which revert back to default) are saved in non-volatile memory and
are preserved until changed - even if an inverter reset is performed
or if all power to the remote or inverter is removed.
Info: The LCD display can be refreshed by holding down the SELECT
knob for 10 seconds.
CAUTION: An accessory that is networked to the inverter may
have adjustable settings that revert back to default if all power to
the inverter is lost. Refer to the operation manual for the particular
accessory to determine if any setting for the accessory is affected.
©2009 Magnum Energy Inc.
5.0 Operation
2