Table of Contents
Advertisement
SHB103 LAG1156 Full-Size SBC User's Manual
(5) Installing the SATA controller driver during the OS installation
Now, the SATA driver disk is ready, and BIOS settings configured, you
can proceed to install Windows 2000/XP onto your SATA hard drive
using the SATA driver. Here is an example for Windows XP installation.
(5)-1
Restart your system to boot the Windows 2000/XP Setup disk,
and press F6 button as soon as you see the message "Press
F6 if you need to install a 3rd party SCSI or RAID driver".
After pressing the F6 button, there will be a few moments for
some files being loaded before next screen appears.
88
Configuring SATA for RAID Function
Advertisement
Table of Contents
Need help?
Do you have a question about the SHB103 Series and is the answer not in the manual?
Questions and answers