Device Setup & Configuration; Figure 2.3:The Device Setting Of Pcie-1752 - Advantech PCIE-1752 User Manual

2.4 Device Setup & Configuration
The Advantech Navigator program is a utility that allows you to setup,
configure and test your device, and later stores your settings on the sys-
tem registry. These settings will be used when you call the APIs of
DAQNavi device drivers. It also provides the programming reference,
user guides and video tutorials.
Setting Up the Device
1. To install the I/O device for your card, you must first run the
Advantech Navigator program (by accessing Start/Programs/
Advantech Automation/DAQNavi/Advantech Navigator).
2. You can then view the device(s) already installed on your system (if
any) on the Installed Devices list. If the software and hardware
installation are completed, you will see PCIE-1752 card in the
Installed Devices list.
Figure 2.3: The Device Setting of PCIE-1752
PCIE-1752 User Manual 14